What is Actual Rise & Drop of BulletProof Hitches 2-Ball Mount MD206

Question

Question:

Question about the Bulletproof Hitch MD206. Bulletproof website states this as a 6 drop/rise but your website states 8 drop/rise. I would like to purchase from your website but need to confirm this. Please advise.

asked by: Ryoji N

0

Expert Reply:

Hey Ryoji,

Good question, and technically both are correct measurements for the BulletProof Hitches 2-Ball Mount for 2" Hitch # MD206.

We just have different ways of measuring rise and drop; BulletProof Hitches measures from the ground to the bottom of the hitch receiver tube while we measure from the ground to the top of the receiver tube. That's why there's a 2" difference between our 8" drop/rise measurements and their 6" drop/rise measurements for the # MD206.

expert reply by: Kyle S

0

Ryoji N.

8/14/2024

Thanks Kyle for clarifying. Make sense !

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hey, Joe. That's a great question. Backup cameras and rearview, observation, cameras are essentially the same, the difference comes down to how they’re wired. With a system like the Furrion Vision S+ Wireless RV Backup System #FR57AD, it’s…

view full answer...

Answer 12

Hello Thad, Thanks for getting that drawing to me. I went ahead and pulled the Patriot Hitches 2" Adjustable Drop Hitch Adapter - 11" Rise/Drop - 7K - Gloss - Silver Accent #PH38PR from the warehouse so I could compare it to your drawing.…

view full answer...

What is Actual Rise & Drop of BulletProof Hitches 2-Ball Mount MD206

Product Page this Question was Asked From

Continue Researching