Parts Needed to Install 7-Way and Brake Controller on 2017 Jeep Wrangler Unlimited

Question

Question:

Hello, I need an electric brake controller and wiring for trailer for 2017 jeep wrangler Rubicon 4 door, my jeep doesnt have tow package. Ricardo

asked by: Ricardo B

0

Expert Reply:

Hey Ricardo, to install a brake controller like the Redarc Tow Pro Elite part # RED44FR you would first need to start with a 4-way like the part # 118416 which is a confirmed fit for your 2017 Jeep Wrangler Unlimited and then to convert to a 7-way you would want the part # ETBC7.

expert reply by: Jameson C

0

Jameson C.

1/19/2026

Hey Ricardo, how did things go getting the brake controller and wiring set up on your Wrangler? Your update could make it easier for the next person adding a similar setup without a tow package.

Answer 1

Hey Troy, thanks for reaching out! The Curt T-Connector Vehicle Wiring Harness #C55124 is only designed to tee in behind one of the tail lights, so you'll want the kind people at U-Haul to recheck their installation and make sure they gave you a…

view full answer...

Answer 2

Hey Charlie, That's the detector's way of telling you that it's at the end of its lifespan and needs to be replaced. LP gas detectors typically have a 5-7 year lifespan. Since the LPCO 30094 detects both lp gas and carbon monoxide…

view full answer...

Answer 3

Gina, the #ST85MR steering stabilizer was designed specifically for the 2021-up F-53, such as yours with the 7.3L V8. The mounting points and steering gear changed slightly from older years, and this model comes with the correct updated bracket kit.…

view full answer...

Answer 4

Your 2017 JK Wrangler won't have the connector at the rear for the #42145 unless it was equipped with the factory tow package. No worries, though. We can make this happen with a minimum of hassle, though it's not quite plug-and-play.…

view full answer...

Answer 5

Hi Jess! We can definitely get your 2009 Jeep Wrangler set up with a 7-way trailer wiring harness. Guessing you do not have the factory towing package? If you are unsure, have a Jeep dealer run you VIN and they will be able to tell you. If you have…

view full answer...

Answer 6

Typically when using D-Ring adapters #BX88357 you'll have to snake some shorter cables, like #RM-910648-20 around the frame rail of the vehicle and then out to the front of the vehicle to connect to your safety cables. There's no easy…

view full answer...

Answer 7

To connect your Blue Ox tow bar, such as their Alpha #BX7380, to your Wrangler Unlimited's towing bumper's 1-inch D-rings you will want adapter kit #BX88358. This includes the 7/8-inch pins and retaining clips. You can see how this installs…

view full answer...

Answer 8

It looks like the Glo Brite Red 410 is a red side marker lamp. It seems like it's a skinny rectangle shape. We have an LED that resembles the Glo Brite Red 410 #MCL82RB. It's LED so it will last a LONG time! Waterproof too! This is the…

view full answer...

Answer 9

I'm assuming this didn't have the factory tow package or any existing wiring already. The T-One Vehicle Wiring Harness #118786 you were looking at will add a 4-way and then from there you will upgrade it to a 7-way using the #ETBC7.

view full answer...

Parts Needed to Install 7-Way and Brake Controller on 2017 Jeep Wrangler Unlimited

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching