Looking For Grease Seals, Dust Caps And Brake Assembly For A Lippert 4,400 lb Axle
Updated 01/19/2026 | Published 07/31/2024
Products Featured in This Question
Question:
I have a Grand Design Transcend 321bh with lippert 4400 axles i do have photos of the axle ID tags. Im needing grease seals, dust caps and at least one loaded brake backplate assembly for the passenger side. I have not been able to find part numbers for these parts yet and was wondering if you all could help.
asked by: Wesley K
Expert Reply:
Hello Wesley. The Lippert 4,400 lb axles use the same standard bearing and seal sizes as a 3,500 lb axle. So, for a full bearing kit you can use the # BK2-100 kit.
The seal has a 1.719" ID and 2.565" OD, and for that you can use the Grease Seal part # 58846.
The grease caps are part # RG04-040.
The brake assemblies for the 4,400 lb axle are also the standard 10" x 2-1/4" brake assembly. For just the passenger side assembly you can use the Lippert Electric Trailer Brake Assembly # LC46WD. Or part # LC66WD if you want the left and right hand assemblies.
Product Page this Question was Asked From
Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: trailer brakes
- Q&A: Looking for Replacement Brake Assemblies and Hub/Drums for Lippert 4,400 lb Axle
- Shop: Lippert Electric Trailer Brake Assembly - 10" - Left Hand - 4,400 lbs
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4.4K
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: RV Interior Lighting
- Q&A: How to Determine if Dexter Brake Assembly is Manual or Self-Adjusting
- Q&A: Need Replacement Hubs And Brakes For Dexter 635096 4,400 lb Axle
- Q&A: How to Identify Self Adjusting Brakes Installed on Dexter 7,000LB Axle for 2019 North Point 377 RLBH
- Shop: Dexter Electric Brake Assembly for 4.4K Axles Manufactured After May 2009 - 10" - Right Hand
- Shop: Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Q&A: Replacement Hubs and Brake Assemblies for Lippert 4,400 lb Axle
- Video: Installing the Dexter Nev-R-Adjust Electric Trailer Brakes on a 2020 Taxa Mantis Travel Trailer
- Shop: Lippert Electric Trailer Brake Assembly - 12" - Left Hand - 4,000 lbs to 7,000 lbs
- Shop: Electric Trailer Brake Assembly - Self-Adjusting - 10" - Right Hand - 3,500 lbs
- Search Results: 10" drum
- Search Results: lippert 4400
- Search Results: 10 x 2~1/4 inch drum trailer brakes
- Q&A: Replacement Brake Assemblies for a Lippert 4,400 lbs Axle
- Q&A: Recommended Brake Assemblies For A Highland Ridge RV Open Range Travel Trailer
- Search Results: rv sewer hose fittings
- Search Results: 141286
- Search Results: camco
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
on Trailer Bearings Races Seals Caps
Jesse M.
1/19/2026
Hey Wesley, how did things go with the grease seals and brake assembly for your Transcend? Your update could make it easier for the next person working with the same Lippert 4,400 lb axles.