Shipping Box Size of Draw-Tite Trailer Hitch # 76134

Question

Question:

What are the shipping dimensions of the Draw Tite 76134? I am limited on the size of items I can receive in the mail and want to make sure it will fit.

asked by: TZ

0

Expert Reply:

The Draw-Tite Trailer Hitch # 76134 will ship in one of our standard hitch boxes, which measures 45-1/2" x 22-1/2" x 8".

expert reply by: Chris R

0

Chris R.

2/3/2026

Hey, did the shipping box size for the Draw-Tite hitch work out for your delivery limits? Knowing how it fit could help others with tight shipping space.

Answer 1

Hello Jim, Great question, I went to Malone's site and and I do not see that they make one with a 48" roller. The great thing about the Malone Axis Truck Bed and Roof Load Extender with Load Roller #MAL32VR is that it is adjustable, the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Adrian! The higher capacity for the B&W #BW47BR and Curt #C77MJ comes from the construction. The B&W hitch weighs 45 lbs and then the Curt and Trailer Mate #TMT54FR both weigh 32 lbs. The Trailer Mate does sit just a tad higher compared…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hi Stephanie! Great question and you’re totally right to ask, because most hitches for the 2024 RAV4 do require a bit of bumper trimming. That includes the Oris Detachable Hitch #TS66VR, since it uses a hidden design that needs a hole cut in the…

view full answer...

Answer 8

Hey Tanner! These hitches are all pretty similar so it can be hard to decide between them. If I were you I would choose the Curt #C77MJ over the other two. The Curt #C77MJ and etrailer #e84ZV actually share the same design, and both have the…

view full answer...

Answer 9

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 10

I compared ground clearance measurements for all of the 2" trailer hitch receivers we have for your 2017 Toyota RAV4 and found that the Curt Trailer Hitch Receiver part #C13406 has a great clearance from the ground to the top of the hitch…

view full answer...

Answer 11

The differences between the between the Curt #C13149 and the Curt #C13406 for your 2017 Toyota RAV4 are that the 13149 has a visible crosstube and is rated for use with a weight distribution system while the 13406 has a concealed crosstube (for a…

view full answer...

Answer 12

The trailer hitch I recommend for your 2017 RAV4 is the etrailer Trailer Hitch, part #e98864. This is a Class lll hitch and it has a 2-inch receiver opening. The trailer wiring I recommend is the T-One Vehicle Wiring Harness, part #118578. This is a…

view full answer...

Shipping Box Size of Draw-Tite Trailer Hitch # 76134

Continue Researching