Dimensions of the CE Smith Post-Style Guide-Ons for Boat Trailers # CE27636

Question

Question:

Could you provide me with the measurements of this product? Specifically the height after the bend. Thanks

asked by: Jason S

0

Expert Reply:

The CE Smith Post-Style Guide-Ons for Boat Trailers # CE27636 that you referenced has a height of 75 inches and sticks out up to 19 inches from the trailer frame it is attached to.

expert reply by: Jameson C

0

Answer 1

The metal tubes inside the CE Smith Post-Style Guide-Ons for Boat Trailers - 75" Tall #CE27636 are the uprights. These uprights, which are available at part #CE27605PG, measure 39" tall.

view full answer...

Answer 2

I have a solution for you, but the U-bolts included with the CE Smith Post-Style Guide-Ons for Boat Trailers #CE27636 are only good for trailer frames that are up to 5-1/2 inches. You would also need the CE Smith Extra Long U-Bolt Kit part #CE11416…

view full answer...

Answer 3

The CE Smith Post-Style Guide-Ons for Boat Trailers - 75" Tall #CE27636 has base bars that are 23 inches long to the outside of the bend. The bars adjusts out to 19" from trailer. I've attached a photo to help.

view full answer...

Answer 4

We have the Replacement Upright #CE27605PG which can be used with the 75" CE Smith Post-Style Guide-Ons #CE27636. The replacement upright is a new style and will work in place of the older style which mounted the 2 posts together with a bracket.…

view full answer...

Answer 5

Hey Justin, the CE Smith Post Style Guide Ons part #CE27635 that you referenced has corner brackets like you mentioned and not bent tube for the 90 degree turn. The one picture shows an outdated version of the guide ons and I just sent an update to…

view full answer...

Answer 6

The I-beam clamps of the Guide Ons part #CE27635 that you referenced are confirmed as a fit on I-beams that are between 2-1/2 inches and 4-1/2 inches wide so the kit would fit your 4 inch wide I-beams.

view full answer...

Answer 7

The CE Smith Post-Style Guide-Ons for Boat Trailers - 75" Tall - U-Bolt Hardware - 1 Pair #CE27636 has steel that is 39 inches tall. You can see this clearly in the Replacement Upright for CE Smith Bunk-Style Guide-Ons for Boat Trailers - Lanced…

view full answer...

Answer 8

As you will be loading and unloading in the stronger river current I recommend using the CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672. These use rollers that will allow for your pontoon to load easier onto your boat trailer.…

view full answer...

Answer 9

The metal uprights in the CE Smith Guide-on set #CE27636 are 39 inches tall. The PVC pipe is 62-1/2 inches tall. There is about 27 inches of the metal upright inside of the PVC pipe when it is assembled.

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Dimensions of the CE Smith Post-Style Guide-Ons for Boat Trailers # CE27636

Product Page this Question was Asked From

Continue Researching