Replacement Mounting Bracket For 75" CE Smith Post-Style Guide-Ons # CE27636

Question

Question:

I got the 75 inch guide on and got carried away with an impact on the first bolt and broke the corner bracket that the post bolts into. What is the part number and can I buy a new bracket through you?

asked by: Bob N

1

Helpful Expert Reply:

We have the Replacement Upright # CE27605PG which can be used with the 75" CE Smith Post-Style Guide-Ons # CE27636. The replacement upright is a new style and will work in place of the older style which mounted the 2 posts together with a bracket. We also have the Replacement Hardware # CE11452-A if you will not be able to reuse your old hardware.

expert reply by: Bud M

1

Answer 1

The CE Smith Post-Style Guide-Ons for Boat Trailers - 75" Tall #CE27636 has base bars that are 23 inches long to the outside of the bend. The bars adjusts out to 19" from trailer. I've attached a photo to help.

view full answer...

Answer 2

I have a solution for you, but the U-bolts included with the CE Smith Post-Style Guide-Ons for Boat Trailers #CE27636 are only good for trailer frames that are up to 5-1/2 inches. You would also need the CE Smith Extra Long U-Bolt Kit part #CE11416…

view full answer...

Answer 3

Hey Justin, the CE Smith Post Style Guide Ons part #CE27635 that you referenced has corner brackets like you mentioned and not bent tube for the 90 degree turn. The one picture shows an outdated version of the guide ons and I just sent an update to…

view full answer...

Answer 4

The metal tubes inside the CE Smith Post-Style Guide-Ons for Boat Trailers - 75" Tall #CE27636 are the uprights. These uprights, which are available at part #CE27605PG, measure 39" tall.

view full answer...

Answer 5

The I-beam clamps of the Guide Ons part #CE27635 that you referenced are confirmed as a fit on I-beams that are between 2-1/2 inches and 4-1/2 inches wide so the kit would fit your 4 inch wide I-beams.

view full answer...

Answer 6

As you will be loading and unloading in the stronger river current I recommend using the CE Smith Roller Style Guide-Ons for Pontoon Boat Trailers #CE27672. These use rollers that will allow for your pontoon to load easier onto your boat trailer.…

view full answer...

Answer 7

I do have an alternative for you since the u-bolts included with the CE Smith Post-Style Guide-Ons #CE27637 will only fit up to a 5-1/4" tall frame. Instead we have the Ark Ezi-Guides Self-Aligning Boat Trailer Loading System. This is superior…

view full answer...

Answer 8

It depends on how tall your boat is. You want the posts to sit up above where the top sides of your boat are. You can see in the video I've included. So I recommend getting the 60" #CE27640 or the 75" #CE27636 guide ons.

view full answer...

Answer 9

We do have a set of guide-ons that will accommodate your boat trailer that has a 3-1/2" wide x 5-1/8" tall frame. The CE Smith Post-Style Guide-Ons for Boat Trailers #CE27637 fits trailer frames up to 4" wide x 5-1/4" tall which…

view full answer...

Answer 10

They sure do. They're available in several different lengths shorter than the 75 inch high #CE27636 guide-ons that you'd looked at. Here are the un-lighted versions: • 65 inches tall, part #CE27637 • 60 inches tall, part #CE27640 • 40 inches…

view full answer...

Answer 11

The guide 65” poles/markers on the CE Smith #CE27637 Guide Ons are only meant as markers to show you where the trailer is. While they can endure some pressure in relation to a straight on approach, off angle pressure which can occur with water…

view full answer...

Answer 12

There are a few factors that go into selecting the correct height of boat guide-on. It varies by setup but if you don't know what height you need you can simply go with an option longer than you'll need and then trim as you see fit. The CE…

view full answer...

Replacement Mounting Bracket For 75" CE Smith Post-Style Guide-Ons # CE27636

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching