Replacement 12" Hub/Drums For a Mobile Home Axle With 2.125" Grease Seal and 1.75"/1.25" Bearings
Updated 07/11/2024 | Published 07/01/2024
Question:
Looking for a hub that will fit my trailer with mobile home axles. Seal is 2.125 Inner bearing is 1.75 Outer bearing is 1.25 12 diameter drum brakes
asked by: Jerry Z
Expert Reply:
It sounds like you are looking for the Dexter Trailer Hub and Drum Assembly # 8-174-5UC3. This has the inner bearing diameter of 1.75", outer bearing diameter of 1.25" and 2.125" grease seal inner diameter. It fits on 12"x2" trailer brakes and has the 5 spoke bolt pattern commonly found on mobile home wheels.
Jerry
7/10/2024
I should have stated that I am looking to move away from the trailer home rim/ time and go to a more standard trailer rim/tire.
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- 25580 / 15123
- Standard Grade
- For 6000 lbs Axles
- For 7000 lbs Axles
- 9/16 Inch Stud
- 5 Spoke Utility
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles - 12" - 5 Spoke Utility
- Search Results: lunette ring
- Search Results: trailer ball coupler
- Shop: Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers - 1-3/4" Wide Double-Eye Springs
- Q&A: Recommendation for Adding Third Axle To Trailer Suspension
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 3/4" Center Hole
- Search Results: leaf spring mounts
- Search Results: equalizer bar
- Shop: MORryde Suspension Upgrade Kit for Triple Axle Trailers - 2-1/4" Long Shackle Straps
- Search Results: trailer suspension parts
- Search Results: dexter 13 122
- Video: Feature Review Curt Heavy Duty Forged Ball Mount for 2-1/2" Hitch
- Video: Hands-On with the Dexter Heavy-Duty Suspension Kit for Triple-Axle Trailers
- Shop: Demco Lunette Ring with 5-Position Adjustable Channel - 3" Diameter - Silver - 25,000 lbs
- Shop: Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 28-3/4" Lift - 12K
- Shop: Curt Lunette Ring - Stud Mount - 2-1/2" Diameter - 20,000 lbs
- Video: Ultimate Overview of the Leaf Spring Bushing
- Video: A Closer Look at the Wet Equalizer Bolt with Castle Nut, Grease Zerk and Cotter Pin
- Video: Front/Center/Rear Hanger for Double-Eye Springs: The Breakdown
- Video: Equalizer for 1-3/4" Wide Double-Eye Springs Review
- Video: Review of the Replacement Wet Shoulder Bolt
- Q&A: How Can I Identify an Axle Without a Sticker?
- Q&A: How Much Does The TA35ZR Taskmaster Modular Wheel Weigh?
- Q&A: What Bike Rack will Allow Me to Get in the Hatch of My Prius, Hollywood Trailrider or Swagman TILT?
- Q&A: Determining If We Have A Replacement For A Dayton Fayette 9254 Hub and Drum Assembly
- Q&A: Replacement 12" Brakes for Fayette Dayton 9254 W-5 Axle
- Q&A: How To Remove Broken Wheel Stud on the Dexter Trailer Hub & Drum Assembly # 8-174-5UC3
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Hard Tonneau Covers vs Soft Tonneau Covers
- Article: How to Measure a Trailer Axle
on Trailer Hubs and Drums
Jerry Z.
7/10/2024
Thank you!