bing tracking image
Last Chance for 2025 Savings!
SAVE NOW
Customer Service My Orders
Q & A Icon

How to Find The Replacement Bearings and Grease Seals For a 2014 Keystone Hideout Camper  

Updated 06/28/2024 | Published 06/21/2024

Question:

Hey, I have a RV trailer 2014 Keystone Hideout....stock axles...what bearing kit do u have? Looking at repacking both axles and replacing seals....thx

0

Expert Reply:

I am going to need a bit more information from you James on your 2014 Keystone Hideout. Looking at the brochure for your camper I see you could have either 3,500lb or 4,400lb axles. I also need to know who manufactured your axles as they could have different components based on the manufacturer. The best way to ensure I find all the correct components is by finding the serial numbers on the axles. These are either stamped into the axle tube on the back side or found on the axles manufacturer tag which is located near the center of the axle. If unable to locate either you will need to remove one of your hubs and find the bearing numbers and grease seal number or measure the spindle. I have included an image below showing where to find the bearing numbers and where to measure on the spindle.

expert reply by:
0
Bud M
Spindle/Bearing Identification
Spindle/Bearing Identification
(click to enlarge)
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>