What is Baseline Number of Washers to Use with Curt MV Weight Distribution System
Updated 02/17/2026 | Published 06/10/2024
Question:
I have the Curt C17052 and Im not sure how many washers i can install on the hitch section. My vehicle has a front end rake to it so my backend sits up higher. adding washers would bring the ball backwards and ultimately add tension to the bars. Im trying to figure out the max number of washers i can install on this.
asked by: Justin S
Expert Reply:
Hey Justin, with the Curt weight distribution system part # C17052 the baseline amount of washers to use in the head of the system is 6 and you'll add or subtract to acquire the desired spring bar tension. As long as this is the properly rated system for the tongue weight of your trailer I wouldn't worry about what the max is as it shouldn't be too many. If it seems like you can't add enough then you would need a higher rated system.
Product Page this Question was Asked From
Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD Only
- Round Bar
- Fits 3 Inch Frame
- Fits 4 Inch Frame
- Fits 5 Inch Frame
- Fits 6 Inch Frame
- Includes Shank
- Top-Mount
- Fits 2 Inch Hitch
- Requires Disconnection
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Can TowSmart Adjustable Ball Mount be Used with Gen-Y Voyager Torsion Flex Ball Mount
- Q&A: Converting 18' Flatbed Trailer From Surge Brakes To Electric Over Hydraulic Brakes
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Correct Curt Weight Distribution System for Towing a 2018 Keystone Bullet Premier Ultra Light 30RIPR
- Q&A: Will Air Lift Air Bags w/ Air Spring Cradles Require Spacer On 2021 Jeep Gladiator With 2-1/2" Lift
- Q&A: Resetting Breakaway Switch on Trailer to Allow Brakes to Release
- Q&A: Troubleshooting Trailer Brakes that Drag After They Locked Up with Breakaway System
- Q&A: Lithium Compatible Converter Replacement For WFCO WF-8955 55amp Converter
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
Jameson C.
2/17/2026
Hey Justin, how did things go after adjusting the washers on your Curt weight distribution system? Did you find the right setup to balance the spring bar tension and your vehicle’s rake? Your update could make it easier for others working with the same system.