Search: door handle   >  

Hello Pat, thanks for reaching out. All of the 1/2" x 20 wheel studs we offer have a .545" knurl diameter. If you can make that work, I recommend the DeeMaxx Drive-In Wheel Stud #DE52GR which is 2" long overall, or the #DE45GR which is…

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…

I have a solution for you that is very similar but the switches of the JR Triple Switch setup part #37212025 are not removable. Instead you'd want the Triple Bezel RV Switch Faceplate #37213625 and the part #37212585 for the SPST switches and the…

I recommend placing 2 of the Single Rocker Switch #37212635 at both the front and rear door with the Double Bezel RV Switch Faceplate #37213615 at each location. This way you will be able to control both lights from either location. Each switch is…

I tried finding information on the blinking green light on your Atwood Series 2001 LP Gas Detector but was unable to find anything that mentioned a blinking green light. The Atwood Series 2001 LP Gas Detector you have is no longer available which is…

For two Lippert slam latch replacements, you can use the Lippert Slam Latch for RV Doors #LC54PJ. These slam latches are going to require a key to unlock and lock it as we do not have any options that don't have a lock. What you could do also if…

You do not need to remove the bed of your truck to install the HappiJac part #LC182906-182971 that you referenced. I found a copy of the install instructions for this part number (see attached pictures) and there's no mention of the bed needing…

I did some research on the Bargman L-300 lock that you mentioned in your question, and it appears that these have not been made in a long time. Specific replacement parts for this particular line are no longer produced. If you are needing to replace…

First of all the Reese Quick-Install Custom Fifth Wheel Kit, part #RP50066-58, does fit your 2012 Chevrolet Silverado 2500 with a 6-1/2 foot bed. I've linked an install video for you. If your Pullrite fits into industry standard rails (ISR) these…

The Replacement Motor with Mounting Plate #LC379608 is the part you will need to replace your 9551 motor from a 2003 Kwikee step.

From my research on the Reflecto light 110-150 that you mentioned, they are round stop/tail/turn lights that measure 6-7/8" in diameter. They were used on older travel trailers in the 1960s and 70s so there are not replacement lens available…