Recommended Trailer Hitch Similar to the OEM Hitch for a 2023 Kia Palisade

Question

Question:

Hi eTrailer would you consider offering an eTrailer equivalent to the Hyundai OEM hitch S8F61-AU300? Thanks for the consideration!

asked by: Mark G

0

Expert Reply:

Hey Mark, we actually already have one that looks identical to the OEM S8F61-AU300. Check out the etrailer Trailer Hitch Receiver # e95ZR.

This hitch has a class III receiver, a max weight capacity of 5,000 lbs, a max tongue weight of 750 lbs, and will bolt right up to your Palisade.

expert reply by: Bryce D

0

Mark G.

6/10/2024

Hi Bryce - while the bolt patterns and load capacity are the same, the eTrailer version hangs below the bumper. This is convenient due to lack of trimming, but not ideal because of ground clearance, aesthetics, and load exposure to exhaust heat. The new OEM version raises the hitch height and with fascia trimming/ add-ons integrates into the bumper. Thoughts?

Bryce D.

6/10/2024

@MarkG Those are good points, but unforutnately both the Curt and etrailer hitches for the Palisade are going to be about the same. The only way around this would be to use the Stealth Hitches # 391HYUNPALIS19 which would require temporary removal of the bumper and fascia for install and would sit completely hidden when installed. Thought the catch is that you can't use the receiver for towing, only hitch accessories. You'd have to use the towing kit # SH28GR if you were interested in towing.

Mark G.

6/10/2024

@BryceD Thanks for the confirmation. I was hoping now that Hyundai makes an OEM version that is integrated into the bumper, eTrailer might consider making an aftermarket version of the same. I will keep my fingers crossed that the team might consider this.

Mark G.

3/4/2025

@BryceD - following up here. Is etrailer going to offer a true Hyundai OEM alternative?

See All (4) Replies to Mark G. ∨

Answer 1

The difference between the etrailer #e95ZR and Curt #C13427 trailer hitches for your 2023 Hyundai Palisade is literally just the finish. The etrailer hitch has a matte black finish while the Curt hitch has the classic glossy black finish that we see…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Hey Eddie, the Curt hitch part #C22RJ and the Trailermate part #TMT29FR are both very similar in design and capacity. I really like the Curt hitches and recommend them whenever available but Trailer Mate isn't bad either. If you are wanting the…

view full answer...

Recommended Trailer Hitch Similar to the OEM Hitch for a 2023 Kia Palisade

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching