Recommended Hub W/ Integrated Drums for a BT8 Spindle
Updated 06/12/2024 | Published 06/03/2024
Products Featured in This Question
Question:
looking for an integrated rotor to fit a Ranger spindle measuring 1 3/8 inter and outer. Rotor must be 9.5
asked by: Charles
Expert Reply:
Charles, it looks like none of our hubs with integrated rotors are going to work with your BT8 Spindle # TRU59FR. We do have the DeeMaxx 10" Hub/Rotor Assembly # DE49VR which will work with 3.5K axles and has a 5 on 4 1/2" bolt pattern, but nothing for your BT8 spindle.
We do also have hubs with integrated drums like the Easy Grease Trailer Hub and Drum Assembly for 2K Axles # AKHD-545-2-EZ-1K which will work with your BT8 spindle.
Product Page this Question was Asked From
DeeMaxx 10" Hub/Rotor Assembly - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Trailer Hubs and Drums
- Hub with Rotor
- Standard
- L68149 / L44649
- Marine Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- DeeMaxx
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Idler Hub To Replace TDE 46245 Hub and Rotor On Boat Trailer
- Q&A: Replacement Hub/Rotor and Bearings for Tie Down Engineering TDE46245
- Q&A: Replacement Hubs and Brake Actuator for 2018 ShorLand'r Boat Trailer
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: Replacement Axle, Hubs, and Brakes for a ShorLandr Dual Axle Trailer
- Q&A: Replacement Trailer Hub Assembly for Dexter 8-248 Hubs
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
Charles H.
6/11/2024
Thanks but the 10" rotor is too large, caliber will not bolt on. Must be 9.6 or 9.5