What Base Plates Are Going to Fit a 2021 Chevrolet Equinox With Active Shutters?

Question

Question:

What flat tow base plates will fit my 2021 chevy equinox with shutters?

asked by: David M

0

Expert Reply:

While we do have some kits like the Curt # C28FR, Demco # DM9519332 and our etrailer # e98965 base plates that say they fit with the active shutters on your 2021 Chevrolet Equinox. You must remove the shutter for them to fit.

expert reply by: Bud M

0

Answer 1

Hello Dennis, thanks for reaching out. We absolutely can provide all the parts needed to flat tow your 2024 Chevy Equinox RS. Here is what I recommend: - etrailer Invisible Base Plate Kit - Removable Arms #e98965 - etrailer SD Non-Binding Tow Bar -…

view full answer...

Answer 2

Hello Linda, you came to the right place. I will start with a list of parts, followed by a few notes for flat towing your vehicle. Here is what I recommend for your 2024 Chevy Equinox: - etrailer Invisible Base Plate Kit - Removable Arms #e98965 -…

view full answer...

Answer 3

Hey Andy, do you have a circuit tester like the part #PTW2993? You could probe the wire of the Demco Charge Line Kit part #DM66VR and see if there is voltage present. If so, then it's charging like it should be.

view full answer...

Answer 4

Hi there Eddie; thanks for the question and we can get your 2023 Chevy Equinox equipped with a Blue Ox base plate and the needed wiring so you can flat tow it behind your motorhome. There are a couple of options for the wiring depending on the type…

view full answer...

Answer 5

Yes, the engine on your Chevrolet Equinox will need to be run at times when flat towing. The easiest way to determine what needs to be done to flat tow your Equinox is to consult your owners manual. I went ahead and took a look at the owners manual…

view full answer...

Answer 6

Hi Fred! We haven't had a chance to install the Roadmaster Direct-Connect Base Plate Kit - Removable Arms #RM56NQ on a 2025 GMC Canyon AT4X yet, so no video yet. However, I just read over the instructions and it looks like you will really only be…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

This is a really good question and I can tell you did your homework on this. But the great news is that your 7-way trailer connector already has the turn signals and brake lights combined onto the same circuit since that is the standard for trailer…

view full answer...

Answer 9

Since you have the 4-cylinder version of the 2016 Chevy Equinox you'll need to pull the ABS fuse instead of fuse #32. The ABS fuse will be identified as either #15 or #16 on your model so you'll need to check the guide on the fuse box cover…

view full answer...

Answer 10

Sorry to hear about your troubles. I have a couple of options for you but we will address the fuse issue first. You need the Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse item #RM76511. This will allow you to replace your…

view full answer...

Answer 11

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 12

Yes, the Roadmaster Crossbar-Style Base Plate Kit #RM-523193-4 is compatible with all models of the 2020 Chevy Equinox so it will fit your AWD version. I have attached an installation video of this kit on a 2018 Equinox that you can check out. For a…

view full answer...

What Base Plates Are Going to Fit a 2021 Chevrolet Equinox With Active Shutters?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching