Will The Timbren TFR250SDG Work On A 2016 F250 With In-Bed Pop Up Camper?

Question

Question:

Hello, Im looking for help Leveling out my F250 SuperDuty with an 8ft bed. Im carrying a 2003 northstar tc1000 pop-up camper and the rear of my truck sags just a little bit. Will this product do the job?

asked by: Danny P

1

2016 F-250 with Northstar Pop Up Camper in bed
(click to enlarge)

Helpful Expert Reply:

Hello Danny, thanks for reaching out. The Timbren # TFR250SDG is definitely a great choice for your 2016 Ford F250. The Timbrens come highly recommended, especially for trucks that have a constant load in the bed like your Nothrstar pop-up camper. They will help to eliminate sagging and keep your ride level. You will also see better stability with less swaying or bouncing.

Timbrens are also very easy to install. So, you get great results with minimal effort. I have included a link to an install video below.

I also went ahead and added the "after" pictures you sent me, and you will see them included just below.

expert reply by: Jesse M

1

After Adding Timbrens 1
(click to enlarge)

After Adding Timbrens 2
(click to enlarge)

Danny P.

6/4/2024

Hello Jesse, Thank you for your reply. I am very excited to learn that this product will work on my truck. I am definitely going to purchase these and look forward to installing them myself. Thanks again Danny

Jesse M.

6/4/2024

@DannyP Of course! Do let me know how you like them once you have tested them out. I think you will be quite happy with the results. The only thing to watch out for would be if the camper is removed from the bed, you can sometimes feel the Timbrens hitting the axle when you go over bumps. With the camper in the bed though, they will help a lot.

Danny P.

6/10/2024

@JesseM Hi Jesse, I installed the Timbren Rear Suspension Enhancement System on my truck this morning. It only took me 45 minutes, mostly due to trouble removing my old ones. I am very impressed with the way these timbrens leveled my truck and the improved stability is amazing. I can't thank you enough for helping me out. Your expertise and advice really sold me on trying these and I am so glad I did. Wish I could attach photos of before and after but I don't see an option here to do so. I would love to leave some positive feedback with photos. Thanks again, Danny Pagel

Jesse M.

6/11/2024

@DannyP Hey Danny, thanks for sharing. The old bump stops can definitely be a pain. Sometimes the bump stops will just rip into pieces before they will unscrew and come off. Its very cool to hear that you are happy with the results. Hopefully now those hours behind the wheel can be less stressful and more enjoyable. Thats what its all about. There is no way to add pictures to the commends section on here (yet), but if you would like to email me pictures I am happy to add them to the original post. My email is [email protected].

Answer 1

I did not catch what kit you were using but if you have a 2015 Ford F-250 then the correct Timbren Rear Suspension Enhancement System is part #TFR250SDG. If this is the kit you have then these will actually attach to the frame and then center over a…

view full answer...

Answer 2

The rubber springs on the Timbren Rear Suspension Enhancement System, #TFR250SDG, measure 4-1/2 inches tall and this system has been confirmed to fit your 2011 Ford F-250 Super Duty. I have included the installation video for you.

view full answer...

Answer 3

Any suspension enhancement, like the Timbren Rear Suspension Enhancement System #TFR250SDG which fit your 2016 Ford F-250, are only meant to supplement a suspension system that is in good working order. If, by adding the slide-in overhead truck…

view full answer...

Answer 4

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Hello Jeff, Sounds like you’ve got a big camper (about 4,000 lbs) on your 2024 F-350 dually, and when it’s loaded, the truck feels bouncy and sways a bit. That’s pretty common with heavy campers, especially if the suspension is still stock.…

view full answer...

Answer 12

Hey Trevor, nice truck and trailer! For your 2024 Ford SuperDuty truck, you can definitely go with either option: - SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-127-47 (1,500lb capacity) - SumoSprings Solo Custom Helper Springs - Rear Axle…

view full answer...

Will The Timbren TFR250SDG Work On A 2016 F250 With In-Bed Pop Up Camper?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching