Would The Curt Trailer Hitch Receiver # C11034 Fit A 2002 Chevy Corvette With Aftermarket Exhaust

Question

Question:

Hello, Im looking at purchasing this hitch, however, my Corvette C5 is equipped with an aftermarket exhaust system. Right off the bat I know Ill have to modify the exhaust a bit since theres a plate in between that ties both sets of tips together. Another potential issue is that theres about 3 inches of space between the two inner tips. Do you know if this could possibly fit? I have attached a picture of the exhaust tip area.

asked by: Erick

0

Aftermarket Exhaust
(click to enlarge)

Expert Reply:

Hi Erick,

Based on the photo you provided installing the Curt Trailer Hitch Receiver # C11034 would likely require you to remove the aftermarket exhaust and reinstall the factory exhaust in order to fit. This hitch simply sits to close to the frame because of the low clearance and would need to sit right where the exhaust currently is.

expert reply by: Kevin C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 6

Hey Doug, I checked with Curt and their hitch part #C58VV is a confirmed for all models of the 2026 Lexus RZ350e including the electric model so it would work great for you. Do you have a bike rack already? What kind of bikes do you have?

view full answer...

Answer 7

Hey Bryan, congrats on your new SUV. As of (05/13/26) the Curt Hitch item #C82RJ and the Curt 4-Way connector item #C34MJ are the only parts we know of that are going to be coming out for the new 2027 Kia Tellurides. It's super early in the year…

view full answer...

Answer 8

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Would The Curt Trailer Hitch Receiver # C11034 Fit A 2002 Chevy Corvette With Aftermarket Exhaust

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching