Recommended Hub for a Spindle That Uses L44649 Inner and Outer Bearings
Question:
Will this hub fit a 1995 Coleman Fleetwood Destiny series with 10 inch tires using L44649 bearings? I am unsure of any information beyond that, as I have actually picked up the trailer yet.
asked by: Greg W
0
Expert Reply:
Yes, it will! The Trailer Idler Hub Assembly for 2K Axles item # AKIHUB-545-2-2K fits spindles that use both a item # L44649 inner and outer bearing.
expert reply by:
Jerred H
0
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Video: Setting Up Your etrailer Trailer Idler Hub Assembly for 2K Axles
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: trailer dust cap
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Shop: Loadstar 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Video: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles Review
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Most Popular Wheel Bearings
- Search Results: d washer
- Search Results: axle cotter pin
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Search Results: 165649
- Search Results: castle nut washer
- Q&A: Replace Hub Assemblies With Bearing Buddies For A 2,000 Lb. Trailer Axle
- Shop: Washer For 1" Spindle
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Search Results: dexter 8 259
- Search Results: dexter 8~259
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals
- Q&A: Replacement Idler Hub For a BTR Spindle On an Enclosed Trailer
- Q&A: Replacement Idler Hubs for 4 x 7 Tarter Utility Trailer
- Q&A: Trailer Hub that Can Fit on 2,000 lb Axle with 5 on 4-1/2 inch Bolt Pattern
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Video: Easy Grease Trailer Idler Hub Assembly for 2K Axles Review
- Shop: Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Shop: Mud Flaps
- Video: ONE LED Trailer Tail Light Feature Review