Trailer Hub that Can Fit on 2,000 lb Axle with 5 on 4-1/2 inch Bolt Pattern
Published 11/29/2019
Products Featured in This Question
Question:
Need a replacement idler hub for a 1 1/4 straight axle. 2000 lb trailer. 5 4.5 bc.
asked by: Eugene L
0
Expert Reply:
Are you sure the diameter of the spindle is 1.25 inches where both bearings ride? That's not typical for a 2,000 lb axle but if instead the diameter is 1.06 inch then you could use the hub part # AKIHUB-545-2-2K which has the 5 on 4-1/2 bolt pattern you need as well.
If instead the spindle measures .99 instead you'd want the part # AKIHUB-545-2-1K.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Idler Hubs for 4 x 7 Tarter Utility Trailer
- Q&A: Replace Hub Assemblies With Bearing Buddies For A 2,000 Lb. Trailer Axle
- Search Results: d washer
- Shop: Washer For 1" Spindle
- Search Results: snowbear trailer parts
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Search Results: dexter 8 259
- Search Results: spindle washer
- Search Results: dexter 8~259
- Search Results: l44649
- Search Results: dexter
- Q&A: Should There Be a Washer on Trailer Spindle Between Spindle Nut and Outer Bearing
- Q&A: Replacement Idler Hub For a BTR Spindle On an Enclosed Trailer
- Q&A: Recommended 4 on 4 Hubs for a Dexter 8-259 MTA-5 Hubs
- Q&A: Correct Replacement Trailer Idler Hub for Triton Snowmobile Trailer with Dexter Torsion Axle
- Q&A: Recommended Hub for a Spindle That Uses L44649 Inner and Outer Bearings
- Shop: Replacement Race for L44643 and L44649 Bearings
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: D Washer for EZ Lube Spindles
- Video: Feature Breakdown: Trailer Spindle Nut 1"
- Video: Review of the Bearing Buddy Bearing Protectors-BB1980A
- Video: Setting Up Your etrailer Trailer Idler Hub Assembly for 2K Axles
- Video: Complete Breakdown of the Trailer Axle with Idler Hubs