Are Dexter 12" x 2" Hydraulic Free Backing With Park Brake Brake Assemblies Available

Question

Question:

023-341-00 023-340-00 Do you stock these brake assemblies? Please and Thank you

asked by: Mark

0

Expert Reply:

Hey Mark,

Yes, we offer the Dexter 023-341-00 under part # DX69CR and Dexter 023-340-00 under part # DX79CR. These also come in a kit together under part # DX89CR.

expert reply by: Kevin C

0

Answer 1

You can absolutely use the Dexter 12 inch brake assemblies. If you have electric brakes then the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies #23-458-459 with your current hubs. You may also want the new…

view full answer...

Answer 2

What is the brand and model of actuator?

view full answer...

Answer 3

It can certainly be tough to remove a stuck hub. There really isn't a tried and true method to get your hub off, particularly if yours somehow got hot enough that it basically welded itself to your spindle. I would use a bunch of WD-40 and just…

view full answer...

Answer 4

When lubricating your Titan Model 6 the Titan Zinc-Plated Brake Actuator part #T43397007K I recommend using a white lithium grease like LubriMatic White Lithium Grease part #L11354. It will give you great protection and lubrication. You will want to…

view full answer...

Answer 5

I was able to cross reference with the manufacturer and find the parts you need. I recommend the Dexter Hydraulic Trailer Brake Kit - Free Backing - 12" - Left and Right Hand Assemblies - 7K #23-342-343 if you don't need the parking brake.…

view full answer...

Answer 6

I have a solution for you but no, the Dexter Hydraulic Drum Brakes item #23-336-337 would lock up every time you backed your trailer up. You need free backing brakes like the Dexter Hydraulic Trailer Brake Kit - Free Backing - 12" - Left and…

view full answer...

Answer 7

Hi Joe, For the Dexter Hydraulic Trailer Brake - Right Hand #DX69CR you'll need part #bp04-162. If you need the left hand assembly #DX79CR shoes as well then you would need part #bp04-164.

view full answer...

Answer 8

Thank you for the photo! Since your current drum brake assembly is part 023-342-00 from Dexter Axle the replacement brake kit for both sides of your axles is part #23-342-343. You will need one kit for each axle on your trailer. These are free…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Are Dexter 12" x 2" Hydraulic Free Backing With Park Brake Brake Assemblies Available

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching