Replacement Lid and Lift Arm for Fan-Tastic Roof Vent 4000BT

Question

Question:

I have a 2014 Roadtrek Popular 190 with a Fantastic roof vent, model 4000 BT and need a new flat vent cover and a flat lid lift arm. The vent cover has an outside dimension of 15 1/8 in X 15 1/8 inch. Can you help? Thanks

asked by: Doug

1

Helpful Expert Reply:

The correct lift arm for your Fan-Tastic Roof Vent 4000BT is the # FVK8014-05. The only flat lid we have is the Replacement Flat Lid for Dometic Fan-Tastic Roof Vent - Smoke # DMC66FR.

expert reply by: Robin H

1

Answer 1

Yes, the Replacement RV Toilet Floor Flange #T05-0784 has the standard 4" diameter opening and 3" FPT (Female Pipe Thread) that will match what you have with your Canplas 3634-5 flange. Attached is a review video for you to check out.

view full answer...

Answer 2

Yes, I contacted Fan-Tastic Vent and the replacement lift arm part #FVK8011-05 fits vents with domed lids. If your vent has a flat lid then you need the lift arm for flat lids part #FVK8014-05. I have attached two photos that show the difference.

view full answer...

Answer 3

Since we don't have a confirmed fitting replacement for a 7300 I recommend taking a few measurements of your current cover's mounting hole locations and seeing it will match up to the Replacement Dome for Fan-Tastic Vent RV Roof Vents -…

view full answer...

Answer 4

RV roof vents with electric lid lifting motors are designed to just stop when they feel resistance which is why the roof vent lids like the part #DMC38FR don't have to be as tall as the lid goes when opened. You'll also get full air flow…

view full answer...

Answer 5

The Demco Classic Base Plate Kit #DM9518312 for your 2014 Kia Soul measures 21" center to center between the brackets. This means that your current fixed tow bar isn't compatible but we do have a solution for you. I recommend using the…

view full answer...

Answer 6

Hey Larry, for your 2020 Kia Soul GT Turbo the correct Blue Ox base plate kit would be the part #BLU76XR which will work great with your Blue Ox tow bar. For the lighting the Roadmaster kit part #RM-15267 comes with everything you'd need to…

view full answer...

Answer 7

Hi Michael! I did a bunch of research and found some stuff. You can only tow a 2026 Chevy Equinox front wheel drive with a gasoline engine behind a motorhome, but NOT with all 4 wheels on the ground. You would have to use a dolly, like the Roadmaster…

view full answer...

Answer 8

I have looked through the 2019 Kia Sorento owners manual. The owners manual on any vehicle tells you how the vehicle should be towed. If your Kia is a front wheel drive then it is acceptable to tow with the back wheels on the ground and the front…

view full answer...

Answer 9

I went out to our warehouse to take a couple measurements on the Fan-Tastic Vent Replacement Lift Arm #FVK8014-05 that you referenced. The distance between the two mounting holes, on center, is right at 3". The overall length on the arm is…

view full answer...

Answer 10

When repairing or replacing the rocker arm like #FVK8011-05 on your Fan-Tastic Roof Vent, you shouldn't need to remove the entire fan assembly. Working from inside the trailer/RV and looking up into the unit, you should be able to first remove…

view full answer...

Answer 11

Hey Rhett, We have the knob, though not a spine piece to go with the Replacement Lift Arm #FVK8014-05; the correct knob is the Replacement Manual Lift Control Knob #FVK1140-09.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Lid and Lift Arm for Fan-Tastic Roof Vent 4000BT

Product Page this Question was Asked From

Continue Researching