What Trailer Hitch Will Fit The 2008 Honda Fit Base Model

Question

Question:

I have a 2008 Honda Fit base model. I looked up hitch fitment and Curt Mfg. comes up but in small print it says it’s for sport model. I also see a Draw Tite model. Can you clarify which one works? Thanks Also will need a wiring harness

asked by: Jason W

0

Expert Reply:

Hello Jason. I double checked with Curt and they do specifically state that the # C11058 hitch will only fit the sport model of the 2008 Honda Fit. So it will not work with your base model.

Instead I recommend the Draw-Tite Class 1 Hitch # 24776. This model has some slight design differences which allow it to fit the base model and Draw-Tite does confirm this. This hitch is rated for 200 lbs of tongue weight instead of only 150 with the Curt so it is the better option anyways.

expert reply by: Jesse M

0

Jacob

6/30/2026

I can't seem to find the Draw-Tite trailer hitch available for sale anywhere. Any idea where I can find one?

Jesse M.

6/30/2026

@Jacob Hey Jacob. Unfortunately, that Draw-Tite # 24776 hitch for the Honda Fit has been discontinued. Draw-Tites parent company went belly-up, and they stopped producing and shipping product. Right now the only hitch we have for a 2007 Honda Fit is the Curt # C11058, but this only fits the sport model.

Answer 1

For your 2007 Honda Fit base model we have the Draw Tite hitch part #24776 as a confirmed fit but the Curt #C11058 is not a fit for the non-Sport models. For trailer wiring too you'd need the part #118420. Then for a ball mount #3593 and hitch…

view full answer...

Answer 2

The available attachment points for a trailer hitch on your 2008 Honda Fit Sport necessitate a hitch design that differs from what you typically think of as a trailer hitch. Truth be told there are many different hitch designs out there and all of…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 8

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

What Trailer Hitch Will Fit The 2008 Honda Fit Base Model

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching