Trailer Hitch that Fits 2007 Honda Fit Base Model

Question

Question:

Can this be rigged to fit a Base model? I am just going to use it to transport motorcycle to mechanic. The trailer I use has a tongue weight of 40 pounds when loaded with Honda GoldWing. My other car is Scion IQ. 2007 Honda Fit Base

asked by: Robert G

1

Helpful Expert Reply:

For your 2007 Honda Fit base model we have the Draw Tite hitch part # 24776 as a confirmed fit but the Curt # C11058 is not a fit for the non-Sport models. For trailer wiring too you'd need the part # 118420.

Then for a ball mount # 3593 and hitch balls # 19256 for a 1-7/8 inch ball or part # 19258 for a 2 inch ball.

expert reply by: Jameson C

1

Answer 1

Hello Jason. I double checked with Curt and they do specifically state that the #C11058 hitch will only fit the sport model of the 2008 Honda Fit. So it will not work with your base model. Instead I recommend the Draw-Tite Class 1 Hitch #24776. This…

view full answer...

Answer 2

The available attachment points for a trailer hitch on your 2008 Honda Fit Sport necessitate a hitch design that differs from what you typically think of as a trailer hitch. Truth be told there are many different hitch designs out there and all of…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Can I see a picture of the tow ring you mentioned? I'd like to forward it to Draw Tite to see what they think. This is a 2007 Honda Fit correct?

view full answer...

Answer 8

For your 2008 Honda Fit, I recommend the Curt Class I, part #C11058 that you referenced. It installs fairly quickly and easily onto your vehicle and adds a 1-1/4 inch hitch. I recommend adding the Curt Class II Drawbar, part #C45521. This is a basic…

view full answer...

Answer 9

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Answer 10

For your 2012 Honda Fit I recommend the #306-X7286 EcoHitch Trailer Hitch Receiver. This Class II hitch has a 2" receiver opening with a maximum gross trailer weight of 2,000 lbs and tongue weight of 300 lbs. As for the 2015 hitch, a hitch from…

view full answer...

Answer 11

You are absolutely right that for your 16-1/2 foot canoe the best option is a trailer because this is going to make it much, much simpler for you to haul your canoe; you'll be able to spend a lot more time in the water and a lot less time loading…

view full answer...

Trailer Hitch that Fits 2007 Honda Fit Base Model

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching