Does Yakima Overhaul Ladder Rack Fit 2024 GMC Sierra 3500 with Retrax Tonneau

Question

Question:

Is this the correct rack for my 2024 GMC 3500 Denali ultimate with a retrax hard retractable bed cover? Also, is this the rack you would recommend? Looking to use it for a canoe and kayaks mostly

asked by: Brett U

0

Expert Reply:

Hey Brett, yes the Yakima Overhaul Ladder Rack part # Y01151-5955 is a fit for the Retrax tonneau cover that fits your 2024 GMC Sierra 3500. This is a really great choice for a ladder rack and it looks like you bought it yesterday so it would work well for you.

expert reply by: Jameson C

0

Answer 1

Hey Brian, sorry about the confusion! So the t-slots of the Pace Edwards Full-Metal JackRabbit #PE36CV are compatible with the "non-commercial" ladder racks as well like the Yakima Overhaul for Tonneau Cover Rails #Y01151-5755. The T-slots…

view full answer...

Answer 2

The RetraxPRO XR Hard Tonneau Cover part #RTX46SR which is a fit for a 2020 GMC Sierra 2500 only sits about 1.5" down from the edge of the bed. Therefore, if you measure from the top of the bed rail to the bottom of the bed floor and subtract…

view full answer...

Answer 3

I can absolutely tell you the difference between Yakima OutPost HD Overland ladder rack and the Yakima OverHaul HD ladder rack, and both are indeed available with 68 inch crossbars, as well as a tonneau cover adapter with the following parts: -…

view full answer...

Answer 4

If your Retrax tonneau cover has the slots on the side rails, you'd want to use the Yakima #Y01151-58 OverHaul HD Adjustable Ladder Rack. If you don't have the accessory slots, the ladder rack wouldn't be compatible and you'd want to…

view full answer...

Answer 5

I recommend the RetraxPRO XR Hard Tonneau Cover #RTT-80485 and Yakima OverHaul HD Adjustable Truck Bed Ladder Rack #Y01151-5955 as the best combination for your 2024 GMC Sierra 3500 long bed. The ladder rack will mount to the t-slot channels in the…

view full answer...

Answer 6

It depends on how you're installing it! I installed two versions of the Yakima Overhaul HD on a 2021 Toyota Tacoma with a 5' bed. The OverHaul HD is always my favorite recommendation since it's a super solid ladder rack that looks and…

view full answer...

Answer 7

I do have some options for you but if you want to haul kayaks at one time or another, you'll need a ladder rack to extend above the height of the cab. Otherwise, your trailer would hit the kayaks if you just had them over the bed with a mid…

view full answer...

Answer 8

Furrion had to come up with an adapter for their Vision S systems like the part #FOS07TASF with the part #FR87PR which fixes the problem that your truck has with this camera setup.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

view full answer...

Does Yakima Overhaul Ladder Rack Fit 2024 GMC Sierra 3500 with Retrax Tonneau

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching