Option For Horse Trailer A-Frame Jack That Bolts On  

We have a really great trailer jack replacement for what you have with the etrailer Sidewind Jack part #TJA-5000S-B. This is a sidewind jack like what you have but as you can see in the attached install video it can install with the handle on the…

Sorry to hear the Square A-Frame Jack #TJDA-5000S didn't work out for you but we do have a round tube jack that will be a perfect replacement. I recommend the Round A-Frame Trailer Jack #TJA-5000S-B which is very similar to the square jack you…

I checked and although there is not a bushing for the Bulldog Swivel Jack - Topwind #BD178101, we do have a 5,000 lb Bulldog A-frame jack with a short retracted height that is going to be exactly what you need. The Round A-Frame Trailer Jack -…

If you are looking to maximize the capacity of the etrailer.com 5,000-pound Jack #TJA-5000S-B, you are not limited to the 2,000-pound drop legs. With that said, you will want to check out the etrailer.com #JF-1005H-Z drop leg. This is rated up to…

You would choose a side wind or top wind jack based on several factors. Each has its advantages. If clearance is an issue for the radius of a top wind, then you would choose a side wind. The opposite is also true. It is my experience that a side…

You can use three 3/8-16 grade 5 bolts to install the etrailer jack #TJA-5000S-B or any other style A-frame jack; though we do not carry the hardware it is available at any hardware store. I attached an install video for this jack for you to check…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…