Recommended Front Receiver Hitch for a 2018 Ford E-350 RV

Question

Question:

I have a 2018 Ford E-350 Super Duty RV and I want to install a front trailer hitch. You product 65053 advises it cannot confirm it will fit my truck. Please advise. I am confused with that warning. Thank you. Chase Pollman

asked by: Chase P

0

Expert Reply:

That's interesting Chase, because on my end I never got that warning. But you can rest easy because the Draw-Tite Front Mount Trailer Hitch Receiver # 65053 you're looking at will work great with your 2018 Ford E-350 RV.

expert reply by: Bryce D

0

Ford E-350 Fitguide
(click to enlarge)

Answer 1

What year is your E450 RV? If it is 2008-2021, you can use Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65053. That said, if you have a newer model, we do have a customer that verified fitment on a 2023 E450 as seen in the…

view full answer...

Answer 2

In order to determine which is the correct front mounted trailer hitch for your motorhome (if available), I would need to know either the year, make, model, and floor plan of your motorhome or the year, make, and model of the chassis your motorhome…

view full answer...

Answer 3

I can tell you definitively that the Draw-Tite Front Mount Trailer Hitch Receiver #65053 is a direct bolt-on installation for a 2018 Ford E-450. This hitch is not welded on, and no holes will need to be drilled in your frame; you will only need to…

view full answer...

Answer 4

Yes, The Draw-Tite Front Mount Trailer Hitch Receiver #65053 you were looking at is confirmed to fit your 2020 Jayco Greyhawk 26Y built on the 2019 Ford F-450 Chassis. The only slight difference of the install would be that the fascia is slightly…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Recommended Front Receiver Hitch for a 2018 Ford E-350 RV

Continue Researching