Will Roadmaster Comfort Ride Suspension Kit Change Height of 2019 Grand Design Solitude 310GK  

The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers item #RM-2460-2580 are not designed to raise or lower your trailer's ride height. You may see a slight height increase because there won't be as much strain on the springs.…

The Roadmaster Comfort Ride System part #RM-2460-2560-3 that you referenced was designed to give a ride height close to the average ride height of a trailer but does have a few different holes you can use when installing everything to allow for some…

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570-3 is not going to change the ride height of your fifth wheel. It will only improve the ride quality!

Hey Thomas, That's a really good question, and your ground clearance and right height won't change on your Dutchmen toy hauler when installing the Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570. You'll…

I reached out to Roadmaster about the Comfort Ride Leaf Spring Suspension Kit w/ Shocks #RM-2460-2580 you are looking to install. While they are unable to give exact numbers for the length of travel on the leaf springs the shocks do have 5-1/2"…

The Roadmaster Comfort Ride system #RM-2460-2570 that you referenced won't add height to your trailer but it is perfectly compatible with the MorRyde systems you've mentioned as we have asked them about it in the past.

The Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers item #RM-2460 is not designed to raise your 2019 Palomino Puma 32BHDB trailer but you may see a slight height increase because there won't be as much strain on the springs. If…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…