Does Roadmaster Comfort Ride System Add Height to Trailer and Compatible with MorRyde SRE4000

Question

Question:

Does this kit increase wheel travel? Or can it be combined with something like MoRrydes SRE4000, LRE4000, or RE4000?

asked by: Jimmy S

0

Expert Reply:

The Roadmaster Comfort Ride system # RM-2460-2570 that you referenced won't add height to your trailer but it is perfectly compatible with the MorRyde systems you've mentioned as we have asked them about it in the past.

expert reply by: Jameson C

0

Answer 1

The Roadmaster Comfort Ride kit part #RM-2460-2560 that was designed for 5,000 lb axles will work great on a trailer that has 4,400 lb axles like you have. The additional capacity beyond what you'd need would not adversely affect ride quality.

view full answer...

Answer 2

I spoke to my contact at Roadmaster and they informed me that you should use the 5,000 Lb Rated Roadmaster Comfort Ride Leaf Spring Suspension Kit part #RM-2460-2560 with 5,200 lb axles. I asked about using the 7,000 Lb Rated Roadmaster Comfort Ride…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

Hi Donny; after looking at several videos of the trailer it does appear to have a 6 on 5-1/2 bolt pattern with ST225/75R15 tires. The Goodyear Endurance ST225/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel #GY97QB will be a direct fit.

view full answer...

Answer 5

Hey Ed, congratulations on the new motorhome! For a surge protector I would stick with the Watchdog models from Hughes Autoformers. These are nice because the surge model can be replaced if you actually experience a surge instead of replacing the…

view full answer...

Answer 6

The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers #RM-2460-2570 will not include wet bolts. This is due to the system using slipper springs to replace the double eye springs that come on most trailers. With the slipper springs…

view full answer...

Answer 7

Hi Glen, It's good to hear from you again! If you're wanting to switch to the Roadmaster Comfort Ride system with the leaf spring, equalizer, and shock absorber upgrades, I recommend using the Roadmaster Comfort Ride Leaf Spring Suspension…

view full answer...

Answer 8

I would be happy to help! The Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shock Absorbers - Tandem 7K Trailer Axles #RM-2460-2570 is for trailers that have 7000lb tandem axles, and use springs that have a 3500lb capacity each (one spring on…

view full answer...

Answer 9

Between the 7K #RM-2460-2570 and 8K #RM-2460-2580 Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks I recommend going with the 7K for your 2018 Vilano 5th wheel. It will give you the best ride possible since it's designed to work with…

view full answer...

Answer 10

Hey Richard, thanks for reaching out! Yes, the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR can be installed with the Roadmaster Comfort Ride #RM-2460-2570. Just as long as the X-Factor is installed on either of the end hangers as…

view full answer...

Answer 11

Welcome back Carl! I definitely recommend going with the 8K Roadmaster Comfort Ride Leaf Spring Suspension Kit w/ Shocks item #RM-2460-2580. Like you said the 7,000 lbs kit is going to come up quite a bit short on your Keystone's overall…

view full answer...

Answer 12

Hey Dave, since you have 7k axles I would recommend just going with the 7k tandem Roadmaster Comfort Ride part #RM-2460-2570 as it's the correct rating and has correct size components. But if you wanted to go with the 8k kit part #RM-2460-2580…

view full answer...

Does Roadmaster Comfort Ride System Add Height to Trailer and Compatible with MorRyde SRE4000

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching