Do You Have a Replacement Cable for the Brake Buddy Stealth Supplemental Braking System?

Question

Question:

Need a spare part for Brake Buddy Stealth system. I need a replacement control cable that activates the brake pedal. Can you help?

asked by: John G

0

Expert Reply:

No, I am sorry I can not help you John. The steel cable you're needing isn't available. It connects inside the Brake Buddy Stealth Supplemental Braking System item # HM39530 so Hopkins does not offer a replacement.

expert reply by: Jerred H

0

Answer 1

To use the Roadmaster BrakeMaster system #RM-9160 on your 2014 Jeep Grand Cherokee Overland, you will need the following items: Stop Light Switch kit, #RM-751449 Seat Adapter, #RM-88287 Because your Grand Cherokee has a combined lighting system (the…

view full answer...

Answer 2

I took a look at the 2022 Dodge Durango R/T owner's manual and it looks like the Mopar 82216418AA harness will be required for your electric power steering. This is something you will have to acquire from your local dealer. I recommend checking…

view full answer...

Answer 3

Hi Steve; I can give you the parts for this but I don't recommend it and you may screw up your brake system. I'm with you 100%, the connector on that thing sucks, but they haven't made a way to swap it out. For a standard 7-way you can…

view full answer...

Answer 4

Hey Chad, it sounds like the red wire of the brake controller of your Brake Buddy Stealth part #HM39530 is not connected to a stoplight circuit that only sees voltage when the brakes are applied. I would check there and let me know what you find as…

view full answer...

Answer 5

The brake light switch wire for your 2023 Jeep Grand Cherokee Summit isn't useable so you wouldn't be able to install a brake light relay kit any way. In cases like this the turn signal will override the brake signal until the computer inside…

view full answer...

Answer 6

No, you can't but I have a way to make your lights work with your current parts. You'll want to install the Roadmaster Universal Hy-Power Diode Wiring Kit item #RM-152 and item #RM-910030-7 if you need the 6-pin connector. Here are the rest…

view full answer...

Answer 7

The Hopkins tow bar wiring harness #HM59VR that you referenced is the same as the Hopkins part number 56209 and is for sure a confirmed fit for your 2018 Jeep Grand Cherokee. We sometimes have to change part numbers because more than one manufacturer…

view full answer...

Answer 8

Since you don't have the tow package wiring on your 2019 Jeep Grand Cherokee, the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118727 is needed. This harness will connect behind your vehicle tail lights and will…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Do You Have a Replacement Cable for the Brake Buddy Stealth Supplemental Braking System?

Continue Researching