bing tracking image

Review of Curt Tow Bar Wiring - Splices into Vehicle Wiring - C63CR

content loading

Customers compare C63CR to these similar products




Products Featured in this Video



Curt Tow Bar Wiring - Splices into Vehicle Wiring - C63CR Review


Jeff: Hello everybody, this is Jeff at etrailer.com. Today, I'm going to take a look at this Curt universal tail light wiring kit for towed vehicles. Now this kit will let you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system. Provides a nice four way flat plug at the front of a towed car to connect to your motor home. It does use the integrated block diodes to isolate any sensitive vehicles electronics from your RV signals. And it does wire in quickly and easily.

Comes with a nice set of instructions that'll describe in detail how it installs. Basically, it'll splice into your vehicle's electrical system with these included butt connectors right here, and you can see each wire is marked. The color coded wires with the wiring guide for a nice easy installation.Now, you may require a brake light relay, which we do sell separately, that's not included. That may be required if you use a supplemental braking system with your towing setup. And the part number on the relay is RM-88400.

And again, we sell that separately if needed, and it's usually listed on this product page as a related product. This part will come with everything laid out here on the table. Comes with your harness, comes with the four way flat extension, comes with the mounting bracket and the hardware for your four way, comes with this little tube of black silicone to put in any openings where your wires run through, and it even comes with some extra cable ties to take up any slack in the wiring.Now, one thing I do want to mention is this wiring kit is not compatible with the PWM electrical system, which is the pulse with modulation systems.But that should do it for the review on the Curt universal taillight wiring kit for towed vehicles.


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee David F
Test Fit:
David F
Employee Bradley B
Test Fit:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.