Westin HDX Grille Guard For A 2016 GMC Sierra 2500HD Denali

Question

Question:

Is the Replacement Mounting Brackets and Hardware for Westin HDX Grille Guard with Punch Plate required for mounting on a 2016 GMC Sierra 2500HD Denali?

asked by: Troy L

1

Helpful Expert Reply:

Hello Troy. A mounting bracket/hardware kit will be required in order to install the Westin HDX Grille Guard on Your 2016 GMC 2500HD Denali. That said, the Westin HDX Grille Guard with Punch Plate # 57-3795 comes with a bracket and hardware kit, so there are no additional parts you will need to purchase in order to install this grille guard on your truck.

expert reply by: Jesse M

1

Troy

4/10/2024

Can I get a winch mount for this that will work on my truck?

Jesse M.

4/10/2024

@Troy Our best option for that would be install a front mount hitch on your truck like the Curt Front Hitch # C31071. The hitch will allow you to mount a winch tray and a winch. I recommend the Bulldog Winch Standard Series Off-Road Winch # BDW10042 which has a 9500lb maximum rating, the Bulldog Winch Hitch Mounted Winch Mounting Plate with Handles # BDW20011, and to be able to remove and reinstall the winch quickly you will need the Bulldog Winch Quick-Connect Set w/Dust Cover # BDW20133.

Troy

4/10/2024

@JesseM and this will all work with the grill guard I originally selected?

Jesse M.

4/11/2024

@Troy It will not. Grille guards and front hitches occupy the same area and mounting locations on the fronts of vehicles. So you would have to choose between either the front hitch or the grille guard.

See All (5) Replies to Troy ∨

Answer 1

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 3

Hey Andrew, we have just what you need with the Demco Recon part #DM93YV which can work with balls that are up to 1-5/8 inches below the deck surface. Since yours is 1 inch this would work perfect. The Recon hitches have really nice jaw systems too…

view full answer...

Answer 4

The Westin HDX #57-3780 is confirmed to fit your 2015 Chevrolet Silverado 2500. However, the front sensors will be constantly going off. This feature can be turned off on your truck.

view full answer...

Answer 5

Hi Tyler; the Westin HDX Grille Guard #57-3785 is designed to fit the 2015 - 2019 Silverado 2500/3500. The mounting hardware is the #57-378PK you looked at but this will not fit your 2010 Ford F-150. The grille guard itself has a different design to…

view full answer...

Answer 6

You do appear to have the Westin HDX Grille Guard #57-3555 for your 2017 Ram 2500. The Replacement Hardware Kit #57-355PK includes all new hardware and mounting brackets to be able to mount the Grille Guard on your Ram.

view full answer...

Answer 7

In regards to the Trailer Hitch Reducer and Extender part #e53YR, the distance from the accessory end to the center of the hitch pin hole is 2-1/2" which includes the collar. I have attached a photo as well as a video of this measurement for…

view full answer...

Answer 8

Yes, it will David so long as you're using a 2-1/2" hitch to 2" hitch adapter like item #e53YR. The Blue Ox Hitch Receiver Immobilizer III item #BX88312 is only designed to be used with a 2-1/2" hitch and shank of 2" hitch…

view full answer...

Westin HDX Grille Guard For A 2016 GMC Sierra 2500HD Denali

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching