Will PD4655MBA/L Work With Lithium Batteries

Question

Question:

Will the wildkat PD4655MBA/L converter work with lithium batteries? The batteries are the same size as before 12v 75ahz

asked by: Scott

0

Expert Reply:

Yes, your PD4655MBA/L will work with lithium batteries. This is the Wildkat 4655L Main Board Assembly (Powered by Progressive Dynamics). The "L" indicates it includes a jumper for charging lithium-ion batteries.

expert reply by: Robin H

0

Answer 1

You sure can Randy! You'll need the Progressive Dynamics Replacement Section item #PD4655V. This is a 55 amp converter charger that is compatible with both lithium and lead acid batteries. It is designed as a factory replacement for the following…

view full answer...

Answer 2

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Answer 3

Hey Brian. To convert the WFCO WF-8955PEC to be lithium compatible you'll need the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel item #PD4655V. This converter section is specifically designed to replace yours. It…

view full answer...

Answer 4

Hey Kyler, thanks for reaching out! **UPDATE IN COMMENT SECTION - JUMPER LOCATION IS DETERMINING FACTOR** The Progressive Dynamics Replacement Section #PD4655V is compatible with lithium batteries. There is a button on the board (see photo) that…

view full answer...

Answer 5

Thanks for the picture Floyd! No, you definitely don't want to cut the plug off. You'll wire up the Progressive Dynamics 9300 Series RV Converter Charger item #PD79RR, according to the directions I have attached below, then you'll plug it…

view full answer...

Answer 6

Hey Kenneth, thanks for reaching out! I think it comes set for Lithium, but you will need to check. If you look at the "H6" position on the circuit board (see attached photo), you'll want to make sure that jumper is in the…

view full answer...

Answer 7

Hey Joe, I don't know what other companies have been telling you but I spoke with Dennis (Progressive Dynamics Tech) and he stated they haven't updated the Progressive Dynamics Replacement Section #PD4655V since 2018 when they added the…

view full answer...

Answer 8

Yes, it will! The Parallax/Magnetek or WFCO RV Power Centers #PD4655V will work with Lithium batteries like the Lifepo you mentioned, flooded lead acid, AGM, and gel batteries.

view full answer...

Answer 9

Hey James, yes the Progressive Dynamics 4000 Series part #PD4060K would be correct to replace what you have now and does have a Lithium battery charge profile. You could definitely install this by yourself.

view full answer...

Answer 10

Hello Lou. On the wfco 8955pec it is a 55 amp unit, its why it has the 55 at the end of the part number. The Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel - 55 Amp #PD4655V, is also a 55 amp unit. Replacing the circuit…

view full answer...

Answer 11

According to my contact at Progressive Dynamics, when installing the #PD4655V replacement converter it's not necessary to replace the DC board, as your current one is still working. However, it wouldn't be the worst idea in the world to go…

view full answer...

Answer 12

The only potential issue I can see happening is if the converter in your 2017 Lance 1475 camper isn't rated for lithium batteries. If that's the case then we have the Progressive Dynamics Replacement Section for AC/DC Power Distribution Panel…

view full answer...

Will PD4655MBA/L Work With Lithium Batteries

Continue Researching