bing tracking image
Q & A Icon

What Hardware Is Needed To Install An Advent Air Replacement RV Air Conditioner  

Updated 03/30/2024 | Published 03/29/2024

Question:

What hardware is needed to replace a domestic ac? It states hardware not included

0

Expert Reply:

The hardware it's referring to are the four bolts that clamp the rooftop condenser unit to the air distribution box inside the trailer. We usually just reuse the bolts from the previous unit during the installation of the new unit # ADV56FR.

Before you purchase the unit you'll want to check for what style plug your current unit has so you can match it. You'll need to remove the cover of the air distribution box and look for the wire harness that hangs down from the condenser unit and plugs into the controller. If it has a 6-pin connector you'll be good with the # ADV56FR. If you have a 9-pin connector then you'll need an adapter # ACCOLKIT to connect to the controller.

If you have a heat pump then we know you have a 9-pin connector and would need the adapter.

expert reply by:
0
Kevin C
6-pin / 9-pin Connectors
6-pin / 9-pin Connectors
(click to enlarge)

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>