Recommended Replacement Brakes for a 2007 Pace Trailer w/ 15 Inch Rims
Updated 04/03/2024 | Published 03/29/2024 >
Products Featured in This Question
Question:
Im looking for a trailer brake kit for a 2007 Pace trailer 15 rims. Single axle. 10 x 6 Do you have any options?
asked by: Brian C
Expert Reply:
We sure do! The etrailer Electric Trailer Brakes item # AKEBRK-35 work with 3,500 lbs axles that have a 4 bolt mounting flange. These left and right 10" x 2-1/4" assemblies have rust-resistant, e-coated backing plates that work with 15" wheels.
For hubs, I would need to know what size bearings you currently have and also your trailers lug pattern so you don't have to change your wheels.
There are two ways to identify the bearings your spindle uses. Wheel bearings are stamped with the part number so the easiest way to determine the correct bearings is to pull them off of your spindle and read the numbers on them.
The other way is to measure your spindle where the bearing sits with a set of digital calipers like item # PTW80157 since you will an exact measurement. The attached diagram will show you how to properly measure your spindle.
Please feel free to email me directly or leave a comment below with the part numbers or dimensions you find and I will be happy to recommend a replacement set of hubs for you.
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: brake hardware
- Search Results: trailer brakes
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Q&A: Mounting Hardware Needed For 10 Pack of Electric Trailer Brakes For 3,500 lb Axles
- Shop: Mounting Hardware for 10" Brake Assemblies - 10 Pairs
- Shop: Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs - 10 Pairs
- Shop: Mounting Hardware for 10" Brake Assemblies
- Shop: Brake Mounting Hardware Kit for 7" and 10" Brake Assemblies
- Shop: Mounting Bolts and Hardware for 12-1/4" Single Brake Assembly - 8,000 lbs to 9,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Search Results: trailer hubs and drums
- Search Results: 126003
- Search Results: trailer spindles
- Search Results: dexter 010~019~00
- Video: Complete Breakdown of the Dexter Trailer Hub and Drum for 3,500-lb Axles
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearings - L68149
- Video: Protect Your Bearings! Inside Look at Bearing Buddies with the Manufacturer
- Video: Feature Breakdown: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle
- Video: etrailer Electric Trailer Brakes Review
- Video: Installation of the etrailer Trailer Hub and Drum Assembly AKHD-545-35-K
- Shop: Trailer Wiring
- Video: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles: The Breakdown
- Q&A: Is There a Hitch that Fits 2024 Kona Electric
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Trailer Hitch
- Search Results: gas struts
- Q&A: Replacement Trailer Brakes Compatible with 10" x 1-1/2" Drums
- Q&A: Replacement LM11949 Bearing and LM11910 Race Needed
- Q&A: Replacement Seal Recommendation for Dexter 010-004-00
- Q&A: Replacements for Hubs 008-418-02 That Use 10 x 1-1/2 Brake Assemblies



Brian C.
4/1/2024
Please recommend a matching Brake Drums and electronic controller for a 2018 Ford Explorer