Recommended Suspension Enhancement System for a 2023 Ford F-150 Raptor

Question

Question:

I need an 2023 FORD F150 RAPTOR TOWING SUSPENSION HELPERS. VIN# 1FTFW1RG2PFB29279 Thank you , TAREK

asked by: Tarek A

0

Expert Reply:

Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System # T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will install directly onto the frame.

expert reply by: Bryce D

0

Tarek A.

3/25/2024

Thank you.

Bryce D.

3/28/2024

@TarekA You bet.

Answer 1

Yes Tarek, the Timbren Suspension Enhancement System #T75MR will work fine with your 2023 Ford Raptor.

view full answer...

Answer 2

Thanks for reaching out! The difference between the Timbren kits are the weight ratings and ultimately how you'll be using them for your 2022 Ford F-150 Raptor: Standard Timbren Kit - #T75MR - 3,000 lb rating Off-Road Timbren Kit - #T73MR - 7,000…

view full answer...

Answer 3

The Timbren Spacer Kit item #T68MR has two 1/2" Spacers and two 1" Spacers which all have a 3/8" bolt hole opening. Also included are 3 pairs of different length bolts to ensure you have the correct length.

view full answer...

Answer 4

Yes, it does. The Spacer Kit for Timbren Suspension item #T68MR will work with the Severe Service Timbren Suspension Enhancement System item #TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1"…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 10

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Recommended Suspension Enhancement System for a 2023 Ford F-150 Raptor

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching