Recommended Roof Repair Tape for Trailer Roofs

Question

Question:

What do you recommend to reseal the roof of a trailer? What is currently on it appears to be a type of sealant tape…

asked by: Cricket

0

Expert Reply:

To replace the sealant tape on the roof of your trailer, I recommend the Quick Roof Repair Tape for RV Roofs item # QR34FR. It is designed to work on EPDM, TPO, Hypalon, metal, modified asphalt, vinyl, fiberglass, PVC, OSB, rigid extruded polystyrene, wood, and tile. You will want to remove the existing tape so it can be applied to a clean, bare surface.

expert reply by: Jerred H

0

Answer 1

That's what we're here for Mark! Happy to help! We don't offer Eternabond tape we have a comparable product, Alphabond that was developed specifically for RV use. Eternabond is a commercial building product that has been used for RV…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 7

Hi Vincent, Thank you for thinking of us for another hitch for your other vehicle! For your 2004 Ford F-150, the Curt Trailer Hitch Receiver part #13357 is a confirmed fit for your truck! It will work on all models, with or without the vibration…

view full answer...

Answer 8

Greetings Timothy, Thanks for writing in, I'm glad you found us! I wasn't finding all the lengths listed for the Hydraulic Dump Trailer Upgrade Kit for Atlas IV Double-Acting Trailer Jack - 39" Hose #ST98FR which is part of the kit on…

view full answer...

Answer 9

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Answer 10

Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…

view full answer...

Answer 11

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Answer 12

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Recommended Roof Repair Tape for Trailer Roofs

Products Featured in This Question

Continue Researching