Parts Needed to Install 7-Way on 2017 Toyota Highlander

Question

Question:

2017 Toyota Highlander Limited without the factory tow wiring harness. There are two connectors at the back underneath the jack storage tray. I need a 7 round harness and do not need a brake controller. Can you recommend something? Thanks

asked by: Charles M

0

Expert Reply:

Hey Charles, so to add a functional 7-way to your 2017 Toyota Highlander what you would want is the Tekonsha 7-way kit part # 22119. While this comes with wiring for a brake controller you don't have to install one at same time.

expert reply by: Jameson C

0

Answer 1

Hey Ken, the Curt no drill bracket part #C57202 wasn't intended to be used on round tube hitches like what you have but that doesn't mean it couldn't use it on a round hitch tube. You'd just need to get it super tight so that the…

view full answer...

Answer 2

I would be happy to help you and make a recommendation based on fitment. First of all you won't have to drill into anything to mount your 7-way vehicle connector. All you will need is the Curt Easy Mount Bracket item #C58000. This bolts directly…

view full answer...

Answer 3

Hello Adam, you came to the right place! To add a 7-way and brake controller to your 2024 Toyota Highlander I recommend the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter #TK57VR. This has everything you need to add a…

view full answer...

Answer 4

To add a 7-Way connector to your 2017 Toyota Highlander, I recommend the Universal Installation Kit for Trailer Brake Controller item #ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Parts Needed to Install 7-Way on 2017 Toyota Highlander

Continue Researching