Recommended Replacement Step Pads for Aries 4" Oval Nerf Bars

Question

Question:

Do you have replacement pads for the Aries oval nerf bars that look like the ones in the picture of the boards? They are different than the replacement pad pics.

asked by: Dale W

0

Expert Reply:

It sounds like you're looking for the Replacement Step Pad for Aries 4" Wide Oval Nerf Bars # AA2090161 which is going to be the same thing that's on the Aries Oval Nerf Bars # AA37FR.

If you're talking abut something else, feel free to come back and let me know what you're looking for and I'd be happy to help.

expert reply by: Bryce D

0

Answer 1

The correct replacement pad for the Aries Automotive 4" wide oval nerf bars on your 2012 Ram 2500 Crew Cab are going to depend on whether they have a 4-pin or 5-pin connection to the bar. If you have a 4-pin connection then the #AA2090133 would…

view full answer...

Answer 2

The difference is the fit application for the two. The part #AA2090133 fits the part #AAS221008 whereas the part #AA2090161 fits the Aries 4 inch wide oval steps that have 5/16 inch diameter pins and therefore is a bit more universal.

view full answer...

Answer 3

With the ends of your Aries Oval Nerf Bars #AAS225041 being sealed and only having the one hole large enough to reach into I recommend using fly tape to insert into the opening you do have. You can then drive around with your 2016 Ram 1500 so the…

view full answer...

Answer 4

I do see the back of the Replacement Step Pad #AA2090161 has 8 ribs while the back of the Replacement Step Pad #AA2090133 has 10 ribs.

view full answer...

Answer 5

Hello John. We do offer replacement step pads for the Aries 4" oval nerf bars. There are two different options available though, so you will need to take a closer look at one of your pads in order to determine the correct replacement. Look at…

view full answer...

Answer 6

Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…

view full answer...

Answer 7

Hey Jascha, yes you can easily change the Kodiak disc brake kit part #KOD53FR to being an oil bath setup by just swapping out the seal to the part #9103309. What's really interesting about the part #KOD53FR is that it actually has oil bath type…

view full answer...

Answer 8

Hi Lee, cool camper! For 2,200 pound axles, you are going to want the Lippert Complete Bearing Kit for 2,200-lb Trailer Axles - L44649 Bearings, L44610 Races #LC23ZP. This includes the bearings, races, seal, cotter pin, and tang washer. It will be…

view full answer...

Recommended Replacement Step Pads for Aries 4" Oval Nerf Bars

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching