Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces 1 of the step pads for your Aries Automotive 4" wide oval nerf bars with 5/16" (6.9 mm) pins.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the Replacement Step Pad for Aries 4-inch Wide Oval Nerf Bars. Now this is a Replacement Step Pad that'll fit the Aries Automotive 4-inch Wide Oval Nerf Bars with the five-sixteenths diameter pins. This part does include the one step pad and the four barrel clips to install it. This is made of a nice hard black plastic. Basically to install this, you just take your barrel clips, insert them onto your pins, and then push them right into the holes on the Nerf Bar. Very simple installation.
A few measurements on this, the overall length it's going to be right at 23 and five-eighths inches long. The width we mentioned is 4 inches wide, and the overall height on this is going to be right at one and a quarter inches tall. But that should do it for the review on the Replacement Step Pad for Aries 4-inch Wide Oval Nerf Bars.
Looks fine, just curious why the plastic ‘pins’ on this one are so much larger than the prior piece I ordered and subsequently lost before securing it to bumper & are spaced differently than the those on first part though I thought I ordered same part number????????
Oddly enough, these line up with holes in bumper but looking for mounting suggestions as holes in bumper too large because they rusted out and little metal ‘cups’ will just fall through
Replacement worked great. Easy to insta ll.
Thank you great appreciation for easy ordering and tracking the.
I was surprised that i found this part.Came quick and i;m a happy person.
perfect replacement, and ultra fast shi pping!!!
The first one I ordered didn’t realize it came with the shims? Installation was good except for one post the shim pushed all the way to the top and was harder to secure. I was more careful with the second one and worked well.
Perfect fit , simple install . Looks just like original so happy with this . Took less than five minutes to clean bar, knock out old retainers and install new step . Looks like original equipment .
Frank
3/26/2024
Step plate still retains its original black color . Still pleased with the product . It has been installed on my truck , which sits outside , for one year . Florida weather is hard on exteriors .
EXACT MATCH AND EASY TO REPLACE!
Fantastic! The part was delivered as mentioned. It matched perfectly and the installation was a breeze. Definitely will order from here again. Thanks!
item is slightly lopsided when you step on it to enter the truck. afraid it might come off during this process
The step pad worked great. I do not have any problems with it. Material is durable, very well made.
It was delivered fast, but fits a little loose hopefully it will stay on long term
So far I like the company. I don't have anything negative to say. Reliable and on time with delivery.
Hubs says it's perfect and will be ordering the other three very soon!
Easy install but instructions were not included. A bit pricey for a piece of molded plastic. Looks a lot better than the cobbled together repair the previous owner of my truck made even though the new step has a slightly different appearance than the original.
Chris
5/24/2022
A year later the step pad is holding up well. Every time I get in or out of the truck Im happy I made the repair.
Good quality, was as described
I read other reviews and thought it was operator error on the issue of the tabs not lining up with the holes. Well, those people were correct. Tabs don't line up with holes. I pounded with a rubber mallet and they still wouldn't install properly. Wasted $50 as im sure they will break off again when my boot catches the gap between the step and the bar. I defiantly won't use this brand again in the future.
Victoria B.
11/25/2019
This replacement step pad is designed to fit Aries Automotive 4 inch wide oval nerf bars with 5/16 inch 6.9 mm pins. Most step pads are custom designed to fit a specific style nerf bar. If this this step pad didnt work well for you, let us know the Brand, width, and pin diameter of your nerf bars and step pads and well be happy to see if we have the right step pads for you.
Well packaged and arrived early
These were a perfect fit for my truck step side bars. Been on over a year now and are just as solid as when i tapped them on.
Arrived as described in advertisement
Part was fine and fit ok, but the hole pattern on my tube was a bit off from the plastic part. The result is fine, just expected the mounting stubs would have been a better fit.
The USPS shipping was sloooow.
This was the second running board step pad I ordered from etrailer. Both were sent promptly and the fit was great. The first one is still working perfectly. Just installed the second one and expect it to do the same and they get a lot of wear and tear.
The replacement step pad has worked out well.
Moose
8/25/2021
Its broken and needs to be replaced. Questionable durability.
Great communication,price and fast ship ping.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
John
2/11/2025
Still working well after over a year of heavy use. Very happy with the product