Parts Needed To Install Electric Drum Brakes On a PWC Trailer With 3,000LB Axle
Updated 03/12/2024 | Published 03/11/2024
Products Featured in This Question
Question:
Can you give me similar recommendations as you did for question 212013 Im looking to add electric drum brakes to my pwc trailer. My axle has a max capacity of 3000 lbs. My tires are 13 inches. I have 5 on 4-1/2 inch bolt pattern wheel. I would also want everything needed for a breakaway kit.
asked by: Matt R
Expert Reply:
Thank you for the pictures Matt. I do see you have the backing plate for the brakes so you are most likely going to have #84 spindle since your axle has a 3,000lb capacity. You can verify this by removing one of your hubs and measuring the landings for the grease seal(1.719"), inner bearing(1.378") and outer bearing(1.063"). If this matches what you have you will want the following parts.
Electric Drum Brakes # AKEBRK-35-SA
Hub/Drum # AKHD-545-35-G-EZ-K Qty 2
Junction Box # 3430001-JBK
Breakaway Kit # 3802346
7-Way Cable # H20044
You will also need some additional wire to run to the trailer brakes but the amount will depend on what length your trailer is.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Parts List to Re-Wire a Trailer w/ Electric Brakes
- Q&A: 7-Way Trailer Plug With Wires For Connecting to Lights & Brakes
- Q&A: How To Wire and Install On-Board Auxiliary Trailer Battery to Power Lights
- Search Results: e99011
- Search Results: 12~2~1
- Search Results: 3802346
- Search Results: 008~247~05
- Search Results: 84546uc3~ez
- Search Results: 23~468~469
- Shop: Dexter Electric Trailer Brake Assembly - 10" - Right Hand - 3,500 lbs
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Shop: 12 Gauge 2 Conductor Jacketed (Brake) Wire Per Foot
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Comparing the eTrailer and Dexter Electric Trailer Brake Kits
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is a #84 Spindle and How Do I Know I Have One On My Trailer?
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Replacement Hub, Drum and Brake Assemblies for AL KO 3,500 lb Axle