Replacement Bearings, Races and Oil Seals for Ranger Tandem Axle Boat Trailer with Cool Oil Hubs

Updated 10/31/2018 | Published 10/30/2018

Products Featured in This Question

Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2

(873)

$110.75

Replacement Race for L44643 and L44649 Bearings

(1236)

$1.63

Replacement Trailer Hub Bearing - L44649

(2074)

$14.16

Replacement Race for L68149 Bearing

(1236)

$1.89

Replacement Trailer Hub Bearing - L68149

(2074)

$14.31

4" Carbon Fiber Digital Caliper

(26)

$12.23

Question:

i have a 2004 ranger 205 vs with ranger 2 axle trailer. Need to replace seal, racers and bearings on cool hubs. What size etc do i need

asked by: Mark

Expert Reply:

To determine the correct replacement bearings, races and seals for the oil bath cool hubs on your Ranger Boat Trailer you will want to remove one of the hub assemblies so that you can take note of the part numbers on the existing components. If you refer to the photo I linked you'll see how these parts numbers usually appear.

Experience with Ranger trailers like yours suggests that it may well use inner bearing # L68149, outer bearing # L44649, inner race # L68111 and outer race # L44610. The oil seals we carry appear on the linked page. You can measure the inner and outer diameters of your seals with a caliper like # PTW80157 to find the correct replacements.

expert reply by: Adam R