Weight Distribution For 6,000 lb Trailer With Short A-Frame
Updated 03/04/2024 | Published 03/03/2024
Products Featured in This Question
Question:
Im looking for an aluminum trailer to tow my Shelby with my F150. Given its a 1500 truck pulling a combined weight of a bit under 6000 pounds, I am in search of a weight distribution hitch. The problem is most trailers I see have closed A-frames that have this metal plate covering where one would usually attach the bars to the frame. Any suggestions or hitches that would work?
asked by: Aj K
Expert Reply:
So what you'll have to do is use the Chain Hangers # C17005 and bolt them onto your trailer frame. I will also say it's very important you contact the trailer manufacturer to see if the trailer is rated for use with weight distribution because not all aluminum trailers are.
Then for a 6,000 lb trailer you would use the Curt MV Weight Distribution # C17051 and instead of using the brackets it comes with you'll use the chain hangers.
The only other thing you'll need is the hitch ball, either 2" Hitch Ball # A-90 or 2-5/16" Hitch Ball # C40030 depending on the trailer coupler size.
Product Page this Question was Asked From
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome
- 10000 lbs GTW
- 2 Inch Diameter Ball
- 1-1/4 Inch Diameter Shank
- CURT
more information >
Continue Researching
- Search Results: andersen rapid hitch
- Shop: Flint Hill Goods Adjustable Wheel Chock - 7-1/8" Wide Tires - Steel
- Shop: Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Video: What to Know About the Curt Weight Distribution Shank for 2.5" Hitches
- Search Results: race 28521 trailer bearings races seals caps
- Shop: Andersen Rapid Hitch 2-Ball Mount for 2-1/2" Hitch - 8" Drop/Rise - 12.5K - Aluminum
- Shop: Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Timken Replacement Bearing and Race Set - L44649 and L44610
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Q&A: Looking For Replacement MasterPro 581750 Hubs On A Yacht Club Pontoon Trailer
- Q&A: Troubleshooting Surt Chain Hangers Not Having Room to Fit on Trailer Tongue
- Q&A: Can Curt Weight Distribution System be Used with V-Nose Trailers
- Q&A: Solution For Weight Distribution Hitch That Cannot Use Regular Clamp-On Brackets
- Q&A: Recommended Weight Distribution Hitch For Trailer with 22" Clearance from Hitch Ball to Body
- Q&A: Option For Weight Distribution & Sway Control w/ Short Arms For V-Nose Trailer
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Search Results: trailer wiring
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Video: How to Choose a Trailer Brake Controller
- Search Results: trailer jack
- Shop: Brake Controller
on Trailer Hitch Ball
Aj K.
3/4/2024
Now that is some real customer service, I appreciate you Kyle.