Recommended Anti Rattle Receiver Lock for a 2" Trailer Hitch

Question

Question:

Does this hitch lock work with Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2inch Hitches - 7-3/4inch Extension Item # RM-071-1075?

asked by: Samuel E

0

Expert Reply:

Yes, since the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches # 63232 is designed to work with 2" trailer hitches and the Roadmaster Anti-Rattle Hitch Extender for Tow Bars # RM-071-1075 is a 2" hitch accessory, the two will be compatible.

expert reply by: Bryce D

0

Answer 1

You could use the Masterlock Padlock set part #ML4683Q to lock the threaded hitch pin of the Roadmaster Anti-Rattle Hitch Extender part #RM-071-1075 that you are interested in. You'd just need to use the lock in place of the cotter pin. The…

view full answer...

Answer 2

The Roadmaster Anti-Rattle Hitch Extender #RM-071-1075 comes with the threaded bolt and pin. This threaded hitch bolt does indeed reduce noise and movement inside the hitch receiver, providing a more secure and quiet connection. However, there is not…

view full answer...

Answer 3

Hey Alan, so the only hitch extender we offer that has the capacity you are wanting is actually 14 inches long and is the Gen-Y part #GY89SR. We don't have any that are 7 inches.

view full answer...

Answer 4

If you are needing to extend the gap between your tow vehicle and trailer, the Roadmaster Anti-Rattle hitch Extender #RM-071-1075 referenced in your question will provide a great solution. This is compatible with any 2 inch hitch receiver and will…

view full answer...

Answer 5

Hello James, We have a hitch extender for you that'll work to protect your Ford Maverick from making contact with your motorhome, though the MaxxTow Hitch Extender with Step #MT70069 is ill suited for the job. Reason is the total capacity of your…

view full answer...

Answer 6

The 20x48 etrailer Off Road Cargo Carrier #e98875 is an excellent choice for off-road and overlanding applications because it lifts your gear 11 inches from the ground, so you can feel confident going over steep and uneven terrain. If your stock…

view full answer...

Answer 7

The RockyMounts Hitch Extender LS #RKY10011 will absolutely work for you on your 2018 Toyota 4Runner based on the weights you gave. A hitch adapter, like an extender, reduces the overall capacity of your hitch by 50 percent. Since you mentioned your…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Donnie, I have great news we do have a front hitch that fits your 2004 Fleetwood Tioga with the Curt front hitch part #33055. This would work great for carrying a bike rack. What kind of bike racks do you have and do you have a bike rack…

view full answer...

Answer 11

Hello Thad, Thanks for getting that drawing to me. I went ahead and pulled the Patriot Hitches 2" Adjustable Drop Hitch Adapter - 11" Rise/Drop - 7K - Gloss - Silver Accent #PH38PR from the warehouse so I could compare it to your drawing.…

view full answer...

Answer 12

Hello Todd, great question. The Yakima EXO Swing Away and Gear Locker #Y62VR is going to allow you to open the rear doors on your 2025 Sprinter 3500XD RV at around 90 degrees. Then with the box removed you may face a clearance issue with your…

view full answer...

Recommended Anti Rattle Receiver Lock for a 2" Trailer Hitch

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching