Replacement Anode Rod for a Suburban 6-Gallon Hot Water Heater

Question

Question:

What anode for Suburban advantage 6-gallon # 194207

asked by: Jack

0

Expert Reply:

I just heard back from Suburban and the correct replacement anode your 6-gallon hot water heater is the Camco RV Water Heater Anode Rod item # CAM11563.

expert reply by: Jerred H

0

Answer 1

I do have an option for you, however, we don't carry any hubs that use bearing number LM67045 for both the inner and outer bearings, or any hubs that use #02475, #14125A, #15123 or #LM67048 (also 1.25 inch ID) for their inner and outer bearings.…

view full answer...

Answer 2

The 7-Way Vehicle Power Adapter Cable #FR87PR shouldn't need to be used for your 2017 Chevy Silverado 1500 and 2019 Dutchmen Aerolite RV. In all honesty I would just swap out your Voyager system for a Furrion Vision S #FOS05TASF instead. The…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 5

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 6

Hey Daniel, Chances are your slipper spring has flattened out over time and is longer than it originally was. Typically an older trailer that may not have had its suspension replaced anytime recently is around an inch longer than it was originally.…

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

Hey Rusty! Can you measure the flat length? Check out the help article below which explains how to measure. This is the best solution for worn out leaf springs. Realistically they're probably a little shorter than 24-7/8" which means we…

view full answer...

Answer 9

Hello Steve, thanks for reaching out. In my honest opinion, leaf springs are leaf springs. There is not going to be a noticeable difference in quality or longevity between the different brands. As long as the length of the spring is correct and the…

view full answer...

Answer 10

Hey JT! Sorry to hear about your trouble with the leaf springs. Hopefully there wasn't a lot of damage and everyone stayed safe. From what I have found the 26E-3500 is the same as the Dexter 072-027-00. This is the 6-Leaf Double-Eye Spring for…

view full answer...

Answer 11

The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like #e74SR, requires a distance of 28-1/2 inches between…

view full answer...

Answer 12

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Replacement Anode Rod for a Suburban 6-Gallon Hot Water Heater

Product Page this Question was Asked From

Continue Researching