Replacement Tarp For Extang Tonneau Cover On A 2018 GMC Sierra 1500 With 6.5' Bed

Question

Question:

I am looking for a replacement tarp Xtang to fit my GMC Sierra 2018 Elevation with a 6.5 ft box. There is a back rack under which the cover must go. Please advise on correct part number. Thanks!

asked by: Michael G

0

Expert Reply:

Good morning Michael I can definitely point you in the right direction. There are a few different Extang covers that fit the 2018 GMC Sierra 1500 with the 6.5' bed. Generally, we like to get a model number or serial number from the cover which we can cross-reference to narrow down exactly what replacement tarp you will need. If you don't have that we can definitely still try to narrow it down though.

I see that you were looking at a replacement tarp for the Extang Trifecta 2.0. Is this what you have on your truck? If so, the correct replacement tarp will be as follows:

- Replacement Tarp for Extang Trifecta 2.0 Soft Tonneau Cover - Black # EX94450-20

If this is not exactly what you have, feel free to send me the model, model number or serial number of your cover and I am happy to make a recommendation.

expert reply by: Jesse M

0

Kevin

9/6/2024

I’m am looking for a replacement tarp for my Extang Trifecta 2.0 trifold bed cover. I have a 2017 Chevy Silverado extended cab with a 6,-6” bed. I looked for the part number but the sticker is blank it must have faded out. Thanks

Jesse M.

9/9/2024

@Kevin Hey Kevin. The Extang Trifecta 2.0 Soft Tonneau Cover # EX92450 for the 2017 Chevy Silverado 6.5' bed uses the replacement tarp # EX93450-20. This is the vinyl tarp so please verify that yours is the vinyl and not the coated canvas cover. The canvas cover is the # EX94450-20 I mentioned above. Generally, we do like to get the model number and serial number to guarantee the correct fit, so this is as close as I can get you without having that info.

Kevin

9/9/2024

@JesseM Thanks for getting back to me so fast. I checked the sticker again today and I can just make out the number 92450. As fat as vinyl or coated canvas I’m not sure how to tell the difference. I took a pic of the top and bottom of the tarp but I don’t see a way to send.

Jesse M.

9/9/2024

@Kevin It is most likely the vinyl tarp since the canvas one was not nearly as common. I am happy to take a look but there is no way to add pictures to the comments section on here. You can email them to me just reply to the email that brought you to this page.

See All (9) Replies to Kevin ∨

Answer 1

Yes, we do offer a replacement tarp for the Extang Trifecta 2.0 Soft Tonneau Cover - Folding - Vinyl item #EX92450. This is the entire system for your 2017 Chevrolet Silverado 1500 short bed. The replacement cover you need is Replacement Tarp for…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Tarp For Extang Tonneau Cover On A 2018 GMC Sierra 1500 With 6.5' Bed

Continue Researching