Which Torklift SuperTruss Extension for 43 inches Between Hitch Face and Rear of Camper

Question

Question:

Hello Etrailer I am looking at getting the supertruss for my truck camper and I have measured from the face of the hitch to the back of the camper I am getting 43 inches. I see they make a 42 or a 48 inch extension. what one do you guys recommend I use.

asked by: Kyle P

0

Expert Reply:

The 48 inch size part # TLE1548 would be your best option as having a little bit extra extension would give you a little better clearance in tighter turns. Especially since your hitch is probably a little recessed under your bumper and extra length would help compensate for that.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Hey Kyle! That is correct. The Coleman-Mach Mach-C Everest has variable-speed cooling and an inverter-driven compressor. However, the Mach-C Everest uses a traditional wall thermostat instead of a remote control. It also works with both ducted and…

view full answer...

Answer 8

Hey Eric, The hitch extenders that we currently offer for a 2-1/2" receiver tube opening unfortunately max out at 6,000lbs GTW and wouldn't be capable of towing the trailer. You're most likely going to need to upgrade to a TorkLift…

view full answer...

Answer 9

Hey Ahmed. I've got a few options for extenders that will work with your Ram truck depending on what kind of hitch you have. If your 2014 Ram 2500 has a 2-1/2" hitch receiver, I recommend the Curt Hitch Extension and Reducer for 2-1/2"…

view full answer...

Which Torklift SuperTruss Extension for 43 inches Between Hitch Face and Rear of Camper

Product Page this Question was Asked From

Continue Researching