2023 Buick Envision Tow Package Plug Location for Trailer Wiring Connector

Question

Question:

Curt quick connect trailer wiring for my 2023 Buick Envision. You think it would be easy to install since it's a plug style connection but I can't find the factory connector for the life of me! Any tips or tricks on finding the location?

asked by: Mike M

0

Expert Reply:

The Curt T-Connector Vehicle Wiring Harness # C56325 installation on your 2023 Buick Envision will be a fairly easy process, but finding that factory tow package plug is very challenging if you don't already know where to look.

Thankfully we've actually shot an installation video of this exact wiring kit on a 2023 Envision so we know the factory connector is up under the rear bumper fascia. I'm attaching a photo of where we connected the Curt plug as well as our installation video for your reference.

Happy towing!

expert reply by: Jon G

0

Curt T-Connector Plug Installed on 2023 Buick Envision with Factory Tow Package
(click to enlarge)

Answer 1

There are a lot of wires and connectors under the rear of your 2022 Buick Envision Preferred but if you check out the attached picture you can see what the connector you are looking for looks like to know if you can use the part #C56325 or not.

view full answer...

Answer 2

Hello Andrew. It looks like our installers have not had the privilege of doing an install on a 2025 Chevy Equinox. I see that the wiring harnesses that we do have in stock have the 6 pin connector. It looks like Curt is aware of this issue and is in…

view full answer...

Answer 3

Congrats on the new SUV! To install a hitch that can be concealed by the rear bumper cover on your 2024 Cadillac XT6, I recommend the Curt item #C82WR. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity and a 675…

view full answer...

Answer 4

I attached a picture of what the Draw Tite hitch part #DT54GR will look like when installed on your 2021 Cadillac XT6. It looks like it fits into the rear bumper cover opening you mentioned.

view full answer...

Answer 5

Hey Greg, you only need the #TLA8022 adapter bracket if the trailer does not have factory step mounting brackets under the doorway. If their 2022 Grand Design Momentum 21G still has the original pull-out steps (and the mounting outriggers are…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Michael, the correct picture of the etrailer base plate kit part #e96GV is the first picture which closely resembles the Demco. I would agree this install requires the least amount of vehicle modification but there is some trimming required. Some…

view full answer...

Answer 8

Hello Jerry, Thank you so much for the pictures, they are always most helpful! I am sorry but there is not a seal packing kit, you will need to replace the entire jack. For your Lippert Level Up with part number 343315-RA, you will want the…

view full answer...