Replacement Axle Nut And Tang Washer For A Dexter 10K Axle Made In 1999
Updated 01/10/2024 | Published 01/09/2024
Products Featured in This Question
Question:
Hi I’m looking for a inner axle nut, tang washer and otter axle nut for a dexter axle p-12 model SLR the last digit on the serial number is hard to make out. It’s either a 0 or a 9 sn:D3653130 or D3653139
asked by: Kyle
Expert Reply:
Last time you contacted us I sent the serial number over to Dexter and they indicated the last digit is in fact a 9. So the serial number is 3653139. I have attached the spec sheet that they sent me. The Dexter 10k axles should have a 1-1/2 inch threaded diameter the correct replacement nuts would be the # 6-96. For the Tang Washer it will be # 5-59.
We do not have a specific size listed for an outer axle nut. My guess is it would be something like a 1" ID like part # 6-191. If you can measure that part of the spindle, or measure the old nut to confirm this that would be great.
(click to enlarge)
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: 84545
- Search Results: bearing protectors
- Search Results: k71~704~00
- Search Results: bk2 100 bearing kit
- Search Results: 21~88
- Shop: Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Replacement Oil Cap Kit for 9,000-lb and 10,000-lb Dexter Axle
- Shop: Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 7,000 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Replacement Manual-Adjuster Spring for 10" and 12" Electric Trailer Brake Assemblies
- Shop: Replacement Bearing Buddy Bras - Model 17B - (Pair)
- Search Results: k71~367~00
- Video: Detailed Breakdown of the Dexter Trailer Hub Drum Assembly
- Search Results: spindle nut
- Video: Complete Breakdown of the Spindle Nut, 1-1/2"
- Q&A: Will Dexter 9K - 10K Hub and Drum Fit Lippert 10K Axle
- Q&A: Availability of Spindle and Hubs for 10,000 lb Trailer Axle
- Q&A: Inner Diameter of Tang Spindle Washers Close to 1-5/8 Inches
- Video: Breaking Down the Dexter Brake Drum Mounting Screws
- Q&A: Replacement Spindle Nut and Tang Washer for Dexter 10k Axle
- Q&A: Correct Replacement for Dexter 9-123 Drum
- Q&A: What Bearings Does Dexter Hub 8-248 Take
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Bearing Kit for 2017 Jayco Jay Flight 17BH
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Tell the Weight Rating of a Trailer Axle