Recommended Hitch for a 2024 Tucson Hybrid SEL Convenience

Question

Question:

I see you have a hitch for the 2024 Hyundai Tucson. It says not for N Line but my question is will it fit the SEL Convenience hybrid? Thanks for your assistance

asked by: Cecil G

0

Expert Reply:

Yes, it will! I checked with Draw-Tite and I can confirm that their item # DT22MR fits all models of the 2024 Hyundai Tucson including your SEL Convenience Hybrid. Technically it'll fit the N-Line but it's not recommended from Hyundai to add a hitch to that model, which is why we say it is not intended.

expert reply by: Jerred H

0

Answer 1

Hey Piotr, thanks for reaching out! The weight ratings between the Curt Trailer Hitch Receiver #C94WR and Towsmart Trailer Hitch Receiver #TS96VR that fit your 2025 Kia Sportage are determined by the testing done according to those manufacturers. I…

view full answer...

Answer 2

To add a hitch to your 2024 Hyundai Tucson, I recommend the Curt item #C94WR. This hitch is custom fit and bolts to your Hyundai with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525…

view full answer...

Answer 3

The trailer hitch options for a 2022 Hyundai Tucson are both concealed meaning the crosstube is hidden. They also both install in the same way as well with no cutting or drilling required. In regards to the Curt Trailer Hitch Receiver part #C94WR and…

view full answer...

Answer 4

The best hitch for your 2023 Kia Sportage is going to be the Draw-Tite Trailer Hitch item #DT22MR. This hitch is custom fit and bolts to your Kia with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 10

Hey David, your RockyMounts MonoRail 2 bike rack #RKY10004 will fit and work great in the Curt hitch part #C94WR. When this hitch is installed there will be 3-1/4 inches from the center of it's hitch pin hole out to the furthest point on the rear…

view full answer...

Answer 11

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Answer 12

Hi James, We installed the Curt Trailer Hitch Receiver part #C94WR on a 2026 Hyundai Tucson and in the video, they take some measurements of the hitch on the vehicle. It looks like from the ground to the top of the inside of the hitch measures about…

view full answer...

Recommended Hitch for a 2024 Tucson Hybrid SEL Convenience

Featured Help Information

Miscellaneous Media

Continue Researching