Can Trailer Valet Wheel Dollies Be Used To Assist In Loading a Low Profile Vehicle In a Car Hauler?

Question

Question:

Would these work to pull a low profile vehicle up a ramp into a car hauler?

asked by: Ken

0

Expert Reply:

Yes, the Trailer Valet Trailer Wheel Dolly # TV56FR can be used to pull your low profile vehicle up a ram into a car hauler trailer. Do note the smaller diameter wheels will require as smooth as a surface as possible for loading and each dolly is rated up to 2,000lbs.

A better option would be to use some Trailer Loading Assist Ramps # RR-TR-5 as these will reduce the angle of the ramp and make it easier to load and unload your low profile vehicles.

expert reply by: Bud M

0

Answer 1

Hello Ronald, thanks for reaching out. The Trailer Valet Trailer Wheel Dolly for Tandem Axle Trailers #TV56FR can work with tires up to 13" wide. This is really intended only for single wheel applications. Must dual rear wheels are wider than…

view full answer...

Answer 2

Thanks for reaching out Michael, That 1988 Mastercraft Prostar 190 is a classic my friend, very nice! You made a great choice going with Dutton-Lainson Covered Hand Winch #DL17085 . It's enclosed for protection, pulls up to 2,600 lbs and has a 2…

view full answer...

Answer 3

There is nothing wrong with your Trailer Valet XL Trailer Dolly #TVXL25. It is not able to make tight turns with a tandem axle as that creates tension since the wheels are trying to slide across the surface rather than roll. The Trailer Valet Trailer…

view full answer...

Answer 4

I attached links to this page that have all of the dimensions for the Fulton F2 Trailer Winch #FW32000101 that you referenced. When looking at it from the front the winch will have an overall width of 14.77", which includes the extension from…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Can Trailer Valet Wheel Dollies Be Used To Assist In Loading a Low Profile Vehicle In a Car Hauler?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching