Will 2023 Model TorkLift Tie-Downs Fit a 2024 Ram 3500

Question

Question:

Hello, I have a 2024 Ram 3500 Crew Cab with an 8 bed. I was wondering if the TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Front/Rear would fit the 2024 chassis? I was only able to find a fits for the 2023 or older. Please let me know when you get a chance. Thanks

asked by: Mathew P

0

Expert Reply:

Yes, the same tie-downs that fit a 2023 model will also fit your 2024 Ram 3500 with the long bed. If you can let me know if you have any steps or boards on your truck as well as what (if any) hitch you have installed on your truck then I can make sure you get the right ones.

For example, the Front Set # TLD2140 and Rear Set # TLD3112 fit the 8' bed as long as you don't have steps on your truck and you have the factory hitch installed. IF you have something else please let me know and I'll be happy to make a different recommendation for you!

expert reply by: Jon G

0

Answer 1

Yes, we do Carl! Basically any cab length running boards are fine, but if they go from the wheel well to wheel well they would interfere with the TorkLift Camper Tie-Downs item #TLD2140. For your 2024 Ram 3500, I recommend the Aries Round Nerf Bars…

view full answer...

Answer 2

The tube of the TorkLift Camper Tie-Downs #TLD2142 is approximately 2" x 2" and will sit directly under the frame of your 2023 Ram 3500 so you can measure from the ground to the frame and subtract 2" to get your ground clearance.

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Thanks for reaching out Kathleen. The TorkLift Custom Frame-Mounted Tie Downs #TL66ZV include the complete set of front and rear tie-downs for both the driver and passenger sides of your truck. This kit is the correct fit provided your Toyota Tacoma…

view full answer...

Answer 5

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Answer 6

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Answer 7

Hey Mike, welcome back! Thanks for all of the info you listed from your Grand Design. Based on that and fact you have 5,200 lb axles the correct bearing kit would be the part #BK3-300 which comes with the correct bearings, races, seal, and a cotter…

view full answer...

Answer 8

Good afternoon Ron, congrats on the new truck! Those are sweet. For your application with the 8 foot bed, OEM hitch, no running boards etc., you'll want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL87DR. They also come in…

view full answer...

Answer 9

Hey Cindy, thanks for reaching out. We may have an extension that will work for you. It will help to know exactly how long of an extension you are needing as this will be one of the main deciding factors. Let me know how long you need it to be in the…

view full answer...

Will 2023 Model TorkLift Tie-Downs Fit a 2024 Ram 3500

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching