Recommended Hitch for a 2024 Chevrolet Trailblazer

Question

Question:

What hitch do you recommend for a 2024 Chevrolet Trailblazer?

asked by: Dean D

0

Expert Reply:

To add a hitch to your 2024 Chevrolet Trailblazer, I recommend the Draw-Tite item # DT55GR. This hitch is custom fit and bolts to your Chevy with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity, and a 525 lbs maximum tongue weight.

I really like the Draw-Tite item # DT55GR because the crosstube mounts behind your rear bumper. This leaves only the 2" receiver visible which not only looks better but helps with ground clearance.

I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like and how to get it set up.

If you are planning on towing you will also need a wiring harness item # TK39FR for incandescent bulbs or item # TK26VR for LED lights and a ball mount kit item # C45534.

expert reply by: Jerred H

0

2024 Chevrolet Trailblazer
(click to enlarge)

Answer 1

To tell if your vehicle has LED lights or incandescent lights, you really need to look at the light bulb itself as the outside lenses can be deceiving. Incandescent lights have a bulb with a filament like #VX-SDH11 where you see the wires making a…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Recommended Hitch for a 2024 Chevrolet Trailblazer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching